Front axle

Category Front axle has the following subcategorys:

The complete offer in Front axle

Summer tyre Diagonal 5.20-13 70P TL P36

Detail

Summer tyre made by Heidenau with original tire profile P36
Diagonal tyre.

tyre wide: 5,20
wheel diameter: 13"
New production made in Germany
delivery without tube for tires

104,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6510

Hose for R13 tires

Detail

Hose insert for the Trabant and Wartburg tires.
Fit to 13 zoll wheels.

for tire size: 135,145,155/ 70 R13
scope of delivery with tire valve and cap

17,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7416

winter tyre 145/80 R13 PNEUMANT

Detail

winter tyre fit for all types of Trabant made by the original manufacturer

tyre with good values in economy, safety and comfort

the pressure for the Trabant tyres type M+S (winter tyre)
Trabant 601 Limousine front axle: 23,21 psi
Trabant 601 Limousine rear axle: 23,21 psi - 26,11 psi
Trabant 601 Universal front axle: 23,21 psi
Trabant 601 Universal rear axle: 23,21 psi - 27,56 psi

49,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6511

1+1

Wishbone, left / right hand, compete Detail Wishbone for the front axle of Trabant 1.1 Mounting place right or left hand. Delivery inclusive outside ball joint and inner bearing(car frame side). delivery without 2x Wishbone bearing for anti roll bar
207,92 €inclusive VAT, plus shipping costs temporary not available Art.No. 901

Inner wishbone bearing ( rubber, socket ) Detail one piece needed to complete steering knuckle
13,17 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 340

Boot for outer wishbone bearing

Detail

Sealing made of best quality use for the outer wishbone bearing at the Trabant 1,1 as good replacement to the original part.

delivery as single part, without clamps
material: rubber, black
high quality

22,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 936

Wishbone bearing for anti roll bar Detail Conical bushing for the front wishbone to connect the anti roll bar. Fit to Trabant 1.1, all models Two pieces will be needed for each steering knuckle Four pieces will be needed total.
12,89 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 939

Steering knuckle left hand complete overhouled

Detail

Wheel bearing housing for the front axle of the Trabant 1,1 left (driver side)

scope of delivery without add-on components

73,85 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 908

Steering knuckle right hand complete overhouled

Detail

Wheel bearing housing for the front axle of the Trabant 1,1 right (codriver side)

scope of delivery without add-on components

73,85 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 909

Plastic bearing for anti roll bar( under frame )

Detail

This bearing is made of rubber. It is splitted around the leng.
It constist to the Bearing holder (under frame ) and hold the Anti roll bar.
The Trabant 1,1 has got two of this bearings at the under-frame.

12,79 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 941

Bearing holder (under frame )

Detail

26,20 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 942

Anti roll bar Detail
63,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 949

Wheel hub, final drive Detail Hub for Trabant 1,1 front axle. bolt circle: 4x100mm
76,38 €inclusive VAT, plus shipping costs temporary not available Art.No. 982

Disk wheel, overhauled 13 Zoll
51,83 €inclusive VAT, plus shipping costs temporary not available Art.No. 984

Collar nut for front axle

Detail

The nut for front axle with collar (spanner gap 30mm) have to be tighten with a torque of 160 up to 200 Nm (16..20kp/m)
fit to:

Trabant 601 from mai 1984 with clocking or synchronism universal shaft
Trabant 1,1
two pieces will be needed for each car

6,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1004

Wheel bearing set FAG, front axle 34 x 64 x 3 7

Detail

Wheel bearing type 34 x 64 x 37 2RS made by FAG in Germany.
The ball bearing fits to Trabant 601 front axle with universal driven shaft new type (tripode) and also to Trabant 1.1 front axle.

delivery inclusive hub axle nut
total twoe piece will be needed
high quality, made by FAG

additional needed special tools for deassembly / assembly:

snap ring pliers
Werkstattpresse mit verschiedenen Matritzen und Dornen

48,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6322

Ball bearing 34 x 64 x 3 7 original DKF

Detail

Original stock of ball bearing for the Trabant 601 front axle with constant velocity drive shaft (tripode)

double row angular contact ball bearing front axle 34 x 64 x 37 2RSR
manufactured by DKF (DDR)
for one alxe you need 1 piece

25,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6862

Ball bearing, front axle 34 x 64 x 3 7

Detail

Doueble ball bearing for the front axle 34 x 64 x 37 2RS. Fit to Trabant 601 front axle constant velocity drive shaft (tripode), Trabant 1,1 front axle and VW Golf I.

two pieces will be needed for the complete axle
good quality, made in EU
delivery as an single part without mounting bits

normaly 23,57 € now 18,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 991

1+1

Penholder bottom, front axle Detail
25,24 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 931

Penholder top, front axle Detail
17,27 €inclusive VAT, plus shipping costs temporary not available Art.No. 932

Cap, shock absorber, coil spring, front side Detail
4,10 €inclusive VAT, plus shipping costs temporary not available Art.No. 933

Telescopic shock absorber

Detail

Buffer for the Trabant 1,1 front axle, with Mc Person system.

scope of delivery: one piece of shock absorber, without anny mounting parts, without coil spring
made in Germany

98,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 946

Coil spring T1-1 front axle

Detail

Helical spring for the Trabant 1,1 front axle with Mc Person system.

made in Germany

79,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6909

Rubber bearing for telescopic shock absorber Detail Upper rubber bearing for the Trabant 1,1 shocks Fit for the Trabant 1,1 front axle right and left hand Good reproduktion. Two pieces will be needed.
6,57 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 947

Guide whasher for telescopic shock absorber Detail
5,33 €inclusive VAT, plus shipping costs temporary not available Art.No. 948

seeger lock ring 22 x 2 mm Detail Snap ring for mounting of the 6-ball constant velocity drive hinge at the drive shaft. Fit to the right and left hand outer tripode universal shaft side of the Trabant 1,1. number of part (spare part catalogue of Trabant 1.1): 03 30328 106
1,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6225

Sleeve for ball joint

Detail

replacement sleeve for ball joint. Fit to Trabant601, Trabant 1,1 and Wartburg 353 and 1,3.

It is only recommendable if ball joint is without any slackness

2,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 938

Cover for wheel disc hole T1.1

Detail

Black plastic cover for the wheel hub of the Trabant 1,1

fit to front axle and rear axle
original-design with IFA-trademark
one piece will be needed for each wheel
made in Europe

6,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1001

puller for ball joint 18/38mm Detail gable width: 18 mm max. lenght of ball joint axle: 38 mm best use for track rod joints of Trabant and Wartburg.
59,10 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6192

The complete offer in Front axle

* All prices inclusive VAT and plus shipping costs.

Front axle

Category Front axle has the following subcategorys:

The complete offer in Front axle

Disk wheel, overhauled 13 Zoll