Spare parts for the exhaust system

The complete offer in Spare parts for the exhaust system

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)

sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

from 5,64 € to 4,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Detail

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)

made in Germany by Elring
sealing between outlet side of the cylinder head and the exhaust manifold
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
scope of delivery one paar (2 pieces)

normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6260

Exhaust manifold, complete Detail The manifold is a original new spare part for the Trabant 1,1.
137,45 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 32

Cover plate for exhaust manifold

Detail

Cover plate for mounting at exhaust manifold with connection for warm air sucktion intake.

fit to exhaust manifold of Trabant 1.1 and Wartburg 1.3 (both 4-stroke)
material: metal, zink coated
made in Germany

19,74 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 39

Exhaust input pipe

Detail

flue pipe between manifold and pre-silencer Trabant 1,1 with 4-cylinder four stroke engine.

diameter: 40mm
lenght: 1006mm
one piece will be needed
additional units:
Clamp between exhaust manifold - input pipe
clamp d=42mm for connection between input exhaust pipe and pre silencer
or pipe clamp d=42,5mm for connection between input exhaust pipe and pre-silencer

42,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 33

Clamp exhaust manifold - input pipe

Detail

The splitted clamp will be used to connect the exhaust input pipe and the exhaust manifold der Trabant 1,1.

one piece will be needed

8,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 34

Pre - silencer -stainless steel-

Detail

Trabant 1,1 pre silencer with 50 mm pipe diameter.
Only to use with the stainless steel rear exhhaust muffler (nr. 6056), not with the original rear exhhaust muffler.

100% stainless steel, made in Germany, 3 years warranty

Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.

295,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6055

Pre - silencer T1.1

Detail

Pre-silencer with pipes for Trabant 1,1
This muffler will be mounted between the exhaust input pipe (manifold pipe) and the after muffler.
New Reproduction in an very good quality.

delivery as single part
Fit to all boyd types like Limousine, Universal (station wagon) and Tramp
one piece will be needed

Additional needed mounting parts and units (not incuded at this offer):

Required special tools for disassambly / assambly:
- angle grinder to cut rusty pipe clamps

Bulky goods !

111,69 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 35

Rear Muffler with pipes -stainless steel-

Detail

Trabant 1,1 muffler with 50mm pipe diameter.
Only to use with the stainless steel front exhhaust muffler (nr. 6055), not with the original rear exhhaust muffler

100% stainless steel, made in Germany, 3 years warranty

445,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6056

Rear Muffler with pipes T1.1

Detail

After muffler with pipes as last piece of the Trabant 1,1 exhaust system.
Delivery as an single part without any mounting bits.
High quality reproduction made in Europe.

one piece will be needed

additional needed units (not part of this offer):

127,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 36

Clamp

Detail

simple pipe clamp
zinc-coated

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

2,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 37

pipe clamp d=42,5mm

Detail

pipe clamp made of 2mm steel strip
zinc-coated
widht: 25mm

Following a table on which places of the cars the pipe clamps will be used:

vehicle	pipe connection from	to
Trabant 1.1	exhaust input pipe	pre-silencer
	pre-silencer	Rear Muffler with pipes
Wartburg 353	Rear Muffler with pipes	muffler with pipes
Wartburg 1.3	exhaust input double pipe	pre-silencer
	pre-silencer	connection pipe
	connection pipe	Rear Muffler with pipes

3,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6344

Retainer

Detail

Retainer for exhauts sytems of the Trabant 1.1, Wartburg 1.3 and many other vehicle types (VW, Audi, Skoda, Seat,..)

material: rubber, black
made by German prducer
delivery as an single part

4,02 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 38

Alu Spray 400ml

Detail

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.

contens: 400ml
product is free of FCKW
heat resistance up to approx 800 °C

price: 46,05 Euro / liter

18,42 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7493

Zinc-alu Spray 400ml

Detail

contens: 400ml
product is free of FCKW
heat resistance up to approx 300 °C

price: 22,25 Euro / liter

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8428

The complete offer in Spare parts for the exhaust system

* All prices inclusive VAT and plus shipping costs.