This site in german: Trabant 1.1 > Ersatzteile > Elektrik 
You are here: > Trabant 1.1> Spare parts> Electrical system
Navigation

electrical installations and spare parts

Category electrical installations and spare parts has the subcategory

The complete offer in electrical installations and spare parts

Fuse box SDS/10.1

Retainer for the fuses (10 pieces) as terminal block with clamp connection for the wires.
Fit to Trabant 1,1 Limousine, Universal and Tramp.
  • original spare part
  • delivery complete cover
  • without fuses
origial spare part no: 8811.17/1
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7476

controller-unit for overrun cut-off (T1.1/W1.3)

Electronical control unit for overrun cut-off of 4-stroke engines of Trabant or Wartburg.
Discontinues the fuel supply during overrun. Works in tandem with Switch for throttle valve und tick-over valve
81,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6489

Sealing ring for electrical mixture preheater

Special sealing ring for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing rubber
  • high quality reproduction
9,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7976

Electrical mixture preheater

electrical mixture preheater for Trabant 1.1 and Wartburg 1.3
96,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 801

Paper sealing for electrical mixture preheater

Upper paper seal for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing paper
  • high quality reproduction
3,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7971

Starter 12V *reclaimed* (T1.1/W1.3/B1000-1)

Complete overhauled starter for Trabant 1,1 Wartburg 1,3 and Barkas B1000-1
with 4-cylinder 4-stroke engine.
Delivery inclusive solenoid switch.
Please send your Trabant starter 12V in advance to our company for reparing.
  • delivery inclusive starter magnet
  • for 12V system
  • overhauled in Germany
Overhaul part, please send the starter motor in advance to our company
235,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6417
1+1

Solenoid switch for starter

Fit to Starter 12V T 1.1 and W1.3 and Starter 12V remanufactuered Trabant 1.1 and Wartburg 1.3
  • remanufactrued EU
  • one piece will be needed
61,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6651

Brush for Dynamo AC

Spare brush fit to AC Dynamo 12V Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • original spare part (NOS)
  • price for each one
  • two pieces will be needed

size:15,5mm x 10mm x 5mm
wire: 40mm
flat plug 6,3mm
original spare part number: 8042.1-041
5,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7598

Signal horn, 12V

universal signal horn for the supply voltage 12V.
Also for any type of vehicle with voltage of 12V (like Audi, VW, Opel, Ford and more).
  • galvaniced metal-body
  • inclusive grounding clip
  • made in Germany
  • one piece will be needed
17,46 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1205

Signal horn 6V

Universal signal horn for the supply voltage 6V.
Also for any type of vehicle with voltage of 6V.
Best use for Old-and Youngtimers.
  • metal-body, galvaniced / chrome
  • outside diameter: 98mm
  • inclusive grounding clip
  • one piece will be needed
19,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7618

Fuse 8A

white fuse for current up to 8A

fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1220

Single grade pull switch

Small pull switch for mounting for example at the dashboards.
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.23
4,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7589

Fuse set

Torpedo-fuse kit ideal for traveles or for the daily use.
Delivery with resealable blister box.
Scope of delivery:
  • 4x 8A (withe)
  • 4x 16A (red)
  • 2x 25A (blue)
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6437

Key switch

One grade switch made of Duro-plastic
Can be used for 6,12 (120W) and 24V (150W) electrical systems.
Best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.21/1
1,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7590

Rocker switch rear window defroster

Angular single step switch with function light for mounting for example at the dashboards.
Colour of the switch: yellow
symbol: window defroster
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
Delivery without bulbs, it will be for example glas base bulb 12V 1,2W one needed.
original spare part number: 8620.19/112
9,88 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7627

Fuse 16A

red fuse for current up to 16A

fit to all vehicles with this type of fuse
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1221

Transmitter for fuel gauge

Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges. Complete with rubber sealing and float.
  • made in Germany
  • one piece will be needed
46,08 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1234

Switch for rear wiper motor

Switch for the Trabant Universal (station wagon) electrical wiper motor rear screen
18,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7104

Combi switch for steering column right hand

wiper switch for Trabant 1,1
76,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7135

Switch and timing switch for wiper motor

Combination switch with 2 level timing,2 level of wiper speeds and button for screen water.
Switch for wiper motor 12V.
Delivery inklusive knob for Trabant-Types. The switch can be modificatet with the knob for Wartburg, Barkas, Multicar ec.
  • New produced spare part
  • one piece will be needed
53,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1117

Wiper motor 12 V, secound hand ( from 88 )

The differnt between wiper motor, built in from year 1988 and later to the wiper motor up to 1987 is the form of motor shaft.
To see on the picture below is the conical shaft of a wiper motor built-in from year 1988. In contrast to this wiper motor the wiper motor built-in up to year 1987 has a cylindrical shaft.
90,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1116

Oel pressure switch, colour brown

Oel pressure switch
it opens if oil pressure is more than 30 kPa (+/-15 kPa)
colour of plastic: brown

original name of the part:
DTR 8640.9/2.1.1
14,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 841

Oel pressure switch, black

oel pressure switch
it closes if oil pressure is more than 140 kPa (+/-20 kPa)
colour of plastic: black

original name of the part:
DTR 8640.10/17.1.1
14,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 840

Thermo switch

Thermostat is mounted in thermotat housing
The thermo switch is a earthless closed-circuit current switch for warm running automatic.
It open if cooling water temperature is about 60°C.
27,13 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 850

Transmitter for temperature indication

transmitter for temperature indication is screwed into thermostat housing
14,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 851

Regulator and cutout relay for AC 12V Dynamo

The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:

  • original spare part
  • one piece will be needed
DLR TGL33604
47,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 775

Dynamo AC 12V, four stroke

Rotary current generator (14V, 57A) complete in germany overhauled spare part.
Fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 with four stroke engine.
Scope of delivery inclusive voltage regulator.
Overhaul part, please send the starter motor in advance to our company
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
289,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 762

V-belt AVX 10 x 700

Alternator belt fit to Wartburg 1,3, Trabant 1,1 and Barkas B1000-1.
  • dimensions: 10mm wide, 700mm long
  • made in England
7,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1106

Switch for heating blower

Switch for the heating at the trabant 1.1
This part is an original spare part.
Two-stage rocker switch.
38,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 74

Instrument panel

85,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1052

Instrument panel

used part
demounted from Trabant 1.1
with components (tachometer, switches)
188,54 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6107

Cover for instrument panel

15,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1053

Relais 12V 50A (changeover contact)

Additional relais for operating supply 12V DC with changeover contact. The maximum current 30 ampere.
  • 5 x blade terminal connection pins (6 x 0,8mm
  • 1x changeover contact (can be used as changeover-, make- or break contact
  • Max. continuous current with 12V DC: 40A (make contact no.87)/ 30A (break contact no.87a)
  • plastic case
  • dimensions: 28 x 28 x 25 mm (without mounting lug)
8,92 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6890

Speedometer with trip meter

Round speedometer for the cars Wartburg 1.3, Wartburg 353, Trabant 1.1, Barkas B1000 and B100-1.
type:
  • Speedscale up to 150km/h
  • inclusive trip meter
  • power 12V
  • delivery without bulbs and without bulb retainer
  • front rim : black
  • mounting diameter: 100mm
  • genuine spare part
  • Zak No: 3.0230/47
81,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7092

Thermo switch for radiator fan

The thermo switch for radiator fan is a make contact, which is screwed directly into the radiator.
  • It closes contact if temperature of coolant is about 95°C +/- 3K and it closes if temperature is about 89°C +/- 3K.
  • fit for Trabant 1,1 and Wartburg 1,3
  • one piece will be needed
20,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 723

Rear fog lamp for rear bumper

Rear fog light for the mounting on top of the bumber.
  • colour: black casing, glass red
  • size: 14 x 7,5 cm
  • delivery without bulb
  • original spare part
9,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7413

Fan for radiator

electrical fan for radiator Trabant 1,1. complete with installing frame for radiator.
curency: 12V
  • made in Germany
  • one piece will be needed
77,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6483

Protection cap for starter lite ( plastic )

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
  • made in Germany
  • one piece will be needed
6,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 786

Roller bearing 6303 ZZ

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=47mm, widness=14mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6333

Roller bearing 6003 ZZ

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side
  • ZZ- synonym for bearing cover, both side
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6330

Pessure spring carbon brush

Coil spring for the carbon brushes at the rotary current generator.
Original spare part (NOS)
For each generator two pieces will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 760

Bolt for regulator

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
  • threed: M5
  • length: 49mm
  • delivery inclusive nut SW8
  • For each generator tow pieces will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7600

Graphite collector ring rotary current generator

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7599

Bearing cover rotary current generator

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
  • metal, galvaniced
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 772

Diode base plate for Dynamo AC

Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-410
49,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7601

Isolating plate for auxiliary diode base plate

Spare plasic isolating plate for the base plate (excitation diodes) for Dynamo AC
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one isolating plate will be needed
original spare part number: 8042.4-412/2:2/1
3,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7662

Auxiliary diode base plate for Dynamo AC

Spare base plate pre installed with excitation diodes.
Best use for exchanging the single complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-412/2
9,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7622

Wiper motor 12V

Wiper motor as universal unit with 12V sytem. This Repro part can be used for the car types: Multicar M22, M24, M25, Wartburg 353 and 1,3, Baraks B1000 and B1000-1, Trabant 601 (from vintage 88) and Trabant 1,1.
Inexpensive option to the original spare part.
The base plate can be turend to modificate the wiper motor for your car type.
The wire connection have to be done byself.
  • delivery as an single part
  • without wires or wire plugs
  • one piece will be needed
  • 12V system
89,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8357

Carrier for carbon brush

Retainer for the carbon brushes at the rotary current generator.
New produced spare part.
For each generator one piece will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1, Multicar M25
17,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8495

Plastic protection, wire tap

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.
  • PVC, lack
  • price per meter
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7675
The complete offer in electrical installations and spare parts

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas