This site in german: Trabant 1.1 > Ersatzteile > Bremsen > Bremse hinten 
You are here: > Trabant 1.1> Spare parts> Brakes> Rear brake
Navigation

Rear brake parts

The complete offer in Rear brake parts

Rear wheel-brake cylinder, original 19,05mm

For this spare part we use only the case of the brake cylinders from latest fabrication. The pistions will be special made and we replace the ring sleeves into original ones made in Germany.
So we can offer you an product by best quality.
  • delivery complete with german sealings
  • brake pistion diameter 19,05 mm
  • Trabant 601 up to vintage: 31.3.1968, for Trabant 500, 600, 601 Baujahr
  • also for QEK-caravan with hydraulic brake system
  • inclusive bleeder screw
46,63 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7449

Rear wheel-brake cylinder, d=19,05mm T1.1

Rear wheel brake cylinder for Trabant 1,1.
Brake-piston D=19,05mm.
Complete with sleeve, without bleeder screw
made in Europe
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 222

Ring sleeve, Ø 19,05 mm, rear ( incl. 2 pieces )

Ring sleeve for wheel brake cylinder D=19,05mm
2 pieces in one set.
Fit to Trabant 500,600 und 601 up to 31.3.1968 and all Trabant 1.1
The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder part no.: 212 should be changed.
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 223

Mounting screw wheel brake cylinder, rear axle, Trabant

Hexagon bolt inclusive lock washer for mounting the rear brake cylinder at the drum brake base plate.
Fit to all kind of Trabant 500,600, 601 and 1.1 models.
  • surface: zinc galvaniced
  • grade: 10.9
  • scope of delivery inclusive lock washer
  • two pieces will be needed for each wheel brake cylinder
0,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7532

Bleeder screw, rear - brake suddle front

Bleeder screw for rear wheel brake cylinder Rear wheel-brake cylinder piston = 19,05mm and Rear wheel-brake cylinder piston = 15,87mm Trabant 601, Trabant 1.1 and QEK-caravans.
The bleeder screw fit also to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

thread: M8 X 1,25
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 214

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215
Delivery only at advance payment.

Brake drum, Trabant 1,1

Reproduced brake drum fit to Trabant 1,1. Bolt circle 4 x 98mm.
  • delivery as single part
  • made in EU
  • 2 pieces will be needed
86,61 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 296

Rear brake shoe set complete

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
56,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 312

Pressure web, left hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, left hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 306

Pressure web, right hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, right hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 307

Lower release spring ( short )

spring for brake shoes front and rear axle
  • length: 67 mm
  • diameter: 10 mm
  • made in EU
  • 1 piece will be needed for each rear wheel brake side
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 313

Upper release spring ( long )

Spring for brake shoes front and rear axle.
  • length: 132 mm
  • diameter: 10 mm
  • galvaniced
  • made in EU
  • 6 pieces will be needed for each car
  • made in Germany
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 314

Rear brake hose

total length: 220mm
12,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 236

Brake hose retainer, original style

sacer spring for connection between flexible brake hose and brake pipe
  • surface bronzing
  • one piece for each screw joint will be needed
2,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 240

Brake hose retainer

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.
  • electrogalvanized, black
  • high quality made in Germany, spring metal
  • one piece for each screw joint will be needed
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6624

Brake cable, left-hand ( short ) -Made in Germany-

Bowden cable for hand brake, fit to all Trabant.
  • short brake wire - left side
  • length complete: 100 cm
  • length wrapper: 560 mm
  • diameter: wire: 3,5 mm
  • diameter wrapper: 11 mm
  • delivery with grease nipple
  • one piece will be needed
38,40 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6205

Brake cable, right-hand ( long ) -Made in Germany-

Bowden cable for hand brake, fit to all Trabant.
  • long brake wire - left side
  • length complete: 144 cm
  • length wrapper: 560 mm
  • diameter: wire: 3,5 mm
  • diameter wrapper: 11 mm
  • delivery with grease nipple
  • one piece will be needed
38,40 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6206

Brake cable, left-hand ( short )

Cable for the hand brake. Fit to Trabant 601 and Trabant 1,1 left hand (driver side)
made in Hungary, good quality, comperes to the original one.
36,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 180

Brake cable, right-hand ( long )

Cable for the hand brake. Fit to Trabant 601 and Trabant 1,1 right hand (co-driver side)
made in Hungary, good quality, comperes to the original one.
36,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 181

nut for cable conduit

speciall nut for adjustment of handbrake and clutch cable
  • fit to all Trabant 500,600,601 and 1,1
  • hexagon nut, galvaniced
  • original spare part
  • one piece will be needed for each one
3,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6068

Slealing for Hand brake lever

18,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1070

Cable conduit, complete

with threaded rod for adjustment of handbrake
  • fit to all Trabant 500, 600, 601 and Trabant 1.1
  • galvaniced metal
  • original spare part
  • delivery without adjustment nut (Art.-Nr.: 6068)
14,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 182

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

toothed segment for hand brake lever

single part
  • original made in Germany by IFA
  • one piece will be needed
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6185

Hand brake lever

Lever for hand brake single part. Delivery without machanical parts.
  • original made in Germany IFA
  • one piece will be needed
35,53 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6306

Screw-cap for brakeline 4,75x0,7 Trabant

Screw-cap for breakline 4,75mm x 0,7mm
fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 264

Centre brake line, complete, right hand

650 mm
brake line is going from master brake cylinder to distributor
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 274

brake line - rear centre right side

1380 mm
brake line is going from brake pressure regulatoring valve to the left rear brake hose
14,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 276

Rear centre brake line ( right hand )

1450 mm
16,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 275

Rear brake line, complete, left side

length: 460mm
14,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 278

Rear brake line, complete, right side

length: 460mm
14,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 277

Sliding element, complete, rear brake

Rear brake sliding element Trabant 601.
Consist of 1 paar, complete set for one brake:
  • 2x sliding pin
  • 2x holder
  • 2x compressing spring
  • material: galvaniced metal
  • made in Germany
  • one piece will be needed for each front brake
15,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 316

lever for parking brake comlete

handbrake lever for the parking brake of the Trabant 500,600,601 and 1.1
  • delivery inclusive unkock push button and toothed segment
  • one piece will be needed
161,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6857

toothed segment for lever for parking brake

toothed segment for the handbrake lever of the Trabant 500,600,601 and 1.1
  • delivery without connection rivet
  • original spare part
  • one piece will be needed
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6994

Pressure spring spline end for brake shoes

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:
  • 4 pieces for brake drum front axle Trabant 601
  • 4 pieces for brake drum rear axle Trabant 601 or 1,1
  • 2 pieces for trailer Qek with hydraulic brake system
  • delivery as an single part
  • made in Germany

additional needed tools for deassembly / assembly:
  • no special tools will be needed
2,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8264

Rear brake shoe set ATE

The brake shoe rear set consist of an metal basic part and an lining.
This kit is made by ATE.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining and 2x rivet.
Lever for the hand brake cable are NOT included. It have to be installed you old ones.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
66,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8306

Rear brake shoe set (no name)

Low budget brake shoe kit consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining, 2x rivet for mounting lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
50,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8353

Brake shoe long, single part, overhauled

Complete in Germany reclaimed brake shoe set for the rear brake.
Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and Kübel, Qeck, Camptourist / Klappfix.
  • use for the rear brake system of Trabant 601
  • scope of delivery: one kit
  • lining length: 2x 210mm and 2x 160mm mm
  • lining thickness: 4 mm
  • width: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed
  • delivery only in exchange after you send original IFA brake shoes to our company in advance
Exchenge part: You have to ship one set of original brake shoes to our company in advance !
74,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8403

Bleeder screw cap with tongue

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.
  • material: brake fluid resistant rubber
  • made in EU
1,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8446
Delivery only at advance payment.

Retainer clip for release spring

Retainer for the release spring for push piece between the rear brake shoes.
Fit for all Trabant 500, 600, 601 and 1.1
Fit the the left and right rear brake.
  • Material: spring clip
  • Reproduction
  • 2 pieces will be needed
3,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8561

Rear brake shoe set complete

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
45,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8593
The complete offer in Rear brake parts

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas