Brake system Trabant 1,1

Category Brake system Trabant 1,1 has the following subcategorys:

The complete offer in Brake system Trabant 1,1

Cap for stop-lamp oil-pressure switch

Detail

Rubber cap for the brake ligths switch. Best protection for dust and wather.

Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26

7,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7308

Stop-lamp oil-pressure switch

Detail

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with flat plug contacts.

Fit for vehicles: Trabant 1.1
made in EU
one piece will be needed

11,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 103

Brake master cylinder, complete (T1.1)

Detail

Tandem bicircle brake master cylinder fit to all Trabant 1.1 types like Limousine, Universal (stadion wagon) and Tramp. Delivery complete preinstalled inclusive sleeves.

original spare part
overhauled in Germany

For more informations to this exchange part please use the Detail button.

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

175,70 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6768

Brake master cylinder, complete (T1.1)

Detail

Bicrcle brake master cylinder for Trabant 1.1. Fit to all types like Universal, Limousine and Tramp. Delivery inclusive sleeves.

made in Europe

3x connector M10x1 for brake pipe
1x connector M10x1 for pressure switch
new reproduction made in EU
one piece will be needed

additional needed parts (please order separate):
1x Connection hose master brake cylinder - plastic reservoir (95mm)(part.-no.:195)
1x Connection hose master brake cylinder - plastic reservoir (120mm) (part.-no.:196)
1x Stop-lamp oil-pressure switch (part.-no.:103)
Break fluid 1L(part.-no.:6202)

additional needed special tools for deassembly / assembly:
Brake pipe spanner 10-11mm, straight(part.-no.:7703)

97,88 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 193

Sleeve set brake master cylinder Detail Sleeve set made in EU for the brake master cylinder Trabant 1,1.
15,20 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 194

Connection hose master brake cylinder - plastic reservoir (95mm)

Detail

Special rubber pipe (brake fluid resistant) for connection brake fluid reservoir and tandem brake master cylinder of the Trabant 1.1

length: 100 mm
one piece will be needed

Price: 25,00 Euro / m

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 195

Connection hose master brake cylinder - plastic reservoir (12cm)

Detail

Special rubber pipe (brake fluid resistant) for connection brake fluid reservoir and tandem brake master cylinder of the Trabant 1.1
{[length: 120 mm][one piece will be needed]}

Price: 25,00 Euro / m

3,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 196

Universal brake line made of steel, PVC-coated 5m, 4,75x0,7 Detail Brakepipeline made of steel and plastic coated. One set constists of 6mm x 0,7mm 5m long for Trabant, Wartburg, Volkswagen
price 3,05 Euro / meter	15,25 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 262

Universal brake line, CUNIFER 5m, 4,75x0,7 Detail Brakepipeline made of NiCuFe material. Size 4,75 x 0,7 mm with length of 5m Fit for many cars also for Trabant, Wartburg
priece 5,45 Euro / meter	37,01 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6177

Universal brake line, PVC-coated in 1 m pices max.5m, 6x0,7 Detail Brakepipeline made of steel and plastic coated. Dimensions: 6mm x 0,7mm maximum 5m long. Fit to Trabant, Wartburg, Volkswagen. Price per meter.
Price: 6,50 Euro / Meter	6,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 263

Screw-cap for brakeline 4,75x0,7 Trabant Detail Screw-cap for breakline 4,75mm x 0,7mm fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 264

Brake line set, complete Detail Set of all brake lines for Trabant 1.1 made of steel brake line, pre-finished with srew-fittings not bent in the right form
58,01 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 282

Rubber lining EU for brake and clutch pedal-shaft

Detail

Rubber pad for the clutch and brake pedal.

material: rubber, black
made in EU
worse qulity
two pieces will be needed

8,55 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8013

Rubber lining made in Germany for brake and clutch pedal-shaft

Detail

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...

material: rubber, black
made in Germany
best quality
two pieces will be needed

12,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 184

release spring for pedal, late model

Detail

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
New production in Germany

fit to Trabant 601 and Trabant 1.1
made of stainless steel (VA)
two pieces will be needed

6,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6643

Foot lever clutch

Detail

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.

fit to Trabant 601 and Trabant 1,1
scope of delivery without Rubber lining for brake and clutch pedal-shaft
one piece will be needed

24,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Detail

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.

fit to Trabant 601 and Trabant 1,1
scope of delivery inclusive Rubber lining for brake and clutch pedal-shaft
one piece will be needed

110,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 185

brake fluid, DOT4, 0,25 litre

Detail

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and a lot of other car types

volume: 250 ml

Additional comment: Notes for used oil disposal

price per liter: 20,16 Euro

5,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6200

Brake fluid, DOT4, 0,5 litre

Detail

Brake fluid made by BREMBO, for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and other cars

volume: 500 ml

Additional comment: Notes for used oil disposal

price per Liter: 13,18 Euro

6,59 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6201

Brake fluid, DOT4, 1,0 litre

Detail

Brake fluid made by BREMBO, for use in Trabant, Wartburg, B1000 and other cars

volume: 1,0 l
norms: FMVSS Nr.116 DOT4 und DOT3, SAEJ1703, DIN/ISO 4925

Additional comment: Notes for used oil disposal

price per Liter: 9,99 Euro

9,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6202

Brake pipe spanner 10-11mm angled Detail Special tool for mounting or demounting of screw-cap for brakelines. type: level angleded Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7702

Brake-cleaner XXL 850ml

Detail

quick-cleaner for brake and clutch parts

FCKW, aceton free
volume: 850 ml
delivery as an single spray

price 5,29 Euro / liter

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

Detail

quick-cleaner for brake and clutch parts

FCKW free
volume: 600 ml
delivery as an single spray

price 7,62 Euro / liter

4,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6252

Brake pipe spanner 10-11mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7703

Brake pipe spanner 12-13mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7992

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Detail

Complete packing unit quick-cleaner for brake and clutch parts

FCKW free
content: 12x sprayer with volume of 600 ml

That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter

46,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7033

Delivery only at advance payment.

Holder for brake fluid reservoir

Detail

Retaining strap for brake fluid tank, fit to 2-circle brake master cylinder.

delivery as single part, without any mounting bits
material: steel
surface: galvanized
one piece will be needed

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7150

Brake shoe set rear axle, overhauled Detail The set consists of four brake shoes fit to Trabant 500,600 and 601. The breke shoes will be complete overhauled in Germany. Please note: your old brake shoes have to be shipped to us before we send you the spare part.
122,17 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7322

Mounting bolt for foot lever unit

Detail

Mounting screw for foot lever unit.

fit to Trabant 601 and Trabant 1,1
scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
4 pieces will be needed

1,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8522

The complete offer in Brake system Trabant 1,1

* All prices inclusive VAT and plus shipping costs.