This site in german: IFA Motor 
You are here: > IFA engine

IFA engine

Category IFA engine has the subcategory

The complete offer in IFA engine

Cylinder head packing ZW 1103 and DKW ZW1101

Cylinder head packing for the Barkas static engine ZW 1103 and DKW ZW1101.
The engine ZW 1103 is offen used by the Tragkarft-portable fire pumpe TS 8/8.
  • made in Germany
  • one piece will be needed
53,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6921

Cylinder base packing ZW 1103

Cylinder base packing for the Barkas static engine ZW 1103
The engine ZW 1103 is offen used by the Tragkarft-portable fire pumpe TS 8/8.
  • special sealing paper, made in Germany
  • one piece will be needed
19,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6932

Exhaust manifold packing ZW 1103

Exhaust manifold sealing with steel insert for the Barkas static engine ZW 1103
The engine ZW 1103 is offen used by the Tragkarft-portable fire pumpe TS 8/8.
  • special sealing paper with mounted steel ring
  • diameter: 50mm
  • made in Germany
  • two pieces will be needed
9,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8014

Sealing ring for crankshaft ZW 1103

Radialsealing for the crankshaft of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • Material is resistant against fuel, temperatur max. 110 degrees for a short time
  • tone piece will be needed
  • size: 30x52x7
original spare part number:
5,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7769

Sealing ring for crankshaft ZW 1103

Radialsealing for the crankshaft of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • Material is resistant against fuel, temperatur max. 110 degrees for a short time
  • tone piece will be needed
  • size: 40x56x10
original spare part number:
6,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7771

Sealing ring for crankshaft ZW 1103 Viton

Radialsealing made of high temperature resisent Viton for the crankshaft of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • Material is resistant against fuel, temperatur max. 180 degrees for a short time
  • tone piece will be needed
  • size: 30x52x7
original spare part number:
19,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7770

Sealing ring for crankshaft ZW 1103 Viton

Radialsealing made of high temperature resisent Viton for the crankshaft of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • Material is resistant against fuel, temperatur max. 180 degrees for a short time
  • tone piece will be needed
  • size: 40x56x10
original spare part number:
19,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7772

Ignition cap ZW 1103

Cap for the contact breaker ignition of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • original spare part (NOS)
  • two pieces will be needed
  • material: aluminium
  • diameter: 45mm
original spare part number: 013 802-0
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7446

Sealing fuel duct cover ZW 1103

Graphitic coated paper seal for mounting the covers at the fuel ducts of the Barkas static engine ZW 1103. (fire fighter pump TS 8/8)
  • reproduction, made in Germany
  • four piece will be needed
  • material: coated sealing paper
original spare part number:
5,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7758

Sealing regulator housing ZW 1103

Paper seal for mounting the controller case at the engine of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • reproduction, made in Germany
  • one piece will be needed
  • material: sealing paper
original spare part number:
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7725

Sealing set Carburettor H362

Paper sealing kit for carburettor type H 362- for fire fighter pump with ZW1103 engine.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
16,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8265

Retainer for main jet, carburettor H 362

Holder for main jet of the carburettor type H 362-.
This is en new german reproduction. Nozzle threat M5.
Spanner gap SW14 and threat M11.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without jet and without sealing
  • material: brass
  • threat: M10x1
  • one piece will be needed
15,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8579

Sealing ring carburettor blowpipe jet

Special made rubber sealing as single part to seal the aluminuim blowpipe jet inside of the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • material: fuel resitant rubber
  • one piece will be needed
2,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8172

Float needle valve, carburettor H 362

Special made float needle valve for the carburettor type H 362-.
This is en new german reproduction.
Spanner gap SW14 and threat M12.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without without sealing
  • material: brass
  • threat: M12
  • one piece will be needed
27,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8586

Sealing for float needle valve, carburettor H 362

Special made fiber sealing ring for float needle valve (LDM-part-no.:8586) for the carburettor type H 362-.
This is en new german reproduction.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • material: fiber sealing
  • one piece will be needed
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8619

Upper sealing ring carburettor float case 24,2 x 29,8 x 1,5

Special made fiber sealing as single part for sealing the float case on top to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 24,2mm
  • outside diameter: 29,8mm
  • thickness: 1,5mm
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8157

Lower sealing ring carburettor float case 20,2 x 25 x 1,5

Special made fiber sealing as single part for sealing the float case bottom side to the carburettor.(Screw)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 20,2mm
  • outside diameter: 25mm
  • thickness: 1,5mm
  • one piece will be needed
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8158

Sealing ring carburettor blowpipe main jet 11 x 15 x 1,0

Special made fiber sealing as single part for sealing the brass blowpipe for the main jet to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 11.1mm
  • outside diameter: 15,1mm
  • thickness: 1,0mm
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7974

Sealing ring carburettor air adjustment slide jet 8 x 11 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (left hand).
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 8,2mm
  • outside diameter: 11mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8170

Sealing ring carburettor air adjustment slide jet 6 x 9 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (right hand)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 6,1mm
  • outside diameter: 9mm
  • thickness: 1,0mm
  • one piece will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8171

Sealing carburettor-flange

Paper sealing of the Zw1103 engine between Carburettor adapter suction pipe.
Carburettor type: H 362
{[one piece will be needed][high quality from Germany]}
1,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7727
1+2

Spring for idle screw, carburettor

Pressur spring for idle adjusting screw at the carburettor.
Fit for:
  • Straitdraft carburetor H 362- : Wartburg 311, 312 and 313
  • Straitdraft carburetor H 362- : Framo V901
  • Straitdraft carburetor H 362- : fire fighter pump TS8
  • Straitdraft carburetor : P70, F8
  • Downdraught carburettor BVF36F: Robur LO, Wartburg 353
  • Downdraught carburettor BVF40F: Wartburg 353, Barkas B1000
  • Block carburettor 28HB: Trabant 500,600 and 601

  • delivery as single part
  • surface: galvaniced
  • made in Germany
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8459

Sealing carburettor-case

Paper sealing for the case of the float Carburettor for fire fighter pump ZW1103 engine.
Carburettor type: H 362-
  • one piece will be needed
  • high quality made in Germany
4,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7728

Float needle valve ZW 1103

The needle velve controls the volume of the float housing.
Mounting place inside of the foat housing cover.
Fit for the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
{L[reproduction][delivery without sealing ring][material: brass][nozzle: 18][typ: tongued][one piece will be needed]
15,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7876

fiber-sealing ring for needle valve

fiber sealing ring for float needle valve, fit to Trabant, Wartburg, Barkas, ZW1103.
data:
  • material: fiber sheated plastic
  • size: 10mm x 14mm x 1,0mm
  • one piece will be needed
0,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6540

current collector ZW 1103

Pantograph for the contact breaker ignition of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8.
  • original spare part (NOS)
  • two pieces will be needed
original spare part number: 013.359-0
6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7445

Felt arm

Felt wiper for oil drop of the contact breaker ignition system.
Fir to some Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8 and at the universal staic engine EL 308.
  • original spare part (NOS)
original part number: 013.359-0
2,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7447

Contact breaker ZW 1103

Ignition contact breaker for the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8 and at the universal staic engine EL 308.
  • original spare part (NOS)
  • tow pieces will be needed
35,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1321

Ignition cable set TS8 with ZW1103 engine

Ignition cable kit as ready-made for the fire fighting pump TS8 with ZW 1103 engine.
Inclusive rubber seal for ignition wire, spark plug and wire connctors for the ignition coils.
Resistance type suppressor: 5kOhm
25,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8418

Ignition capacitor ZW 1103

Capacitor for the contact breaker ignition system of the Barkas static engine ZW 1103. mounted at the fire fighter pump TS 8/8 and at the universal staic engine EL 308.
  • delivery without mounting parts)
  • tow pieces will be needed
2,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7448

Spark plug terminal universal 5 kOhm

Best terminal without metalcoat for all versions of sparks.
Good replacment as the old type of spark plugs with thread type M18.
Resistance type suppressor: 5kOhm
producer: NGK
inclusive rubber seal for ignition wire and spark plug.
7,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7724

Spark plug M18 - 175, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (W18).
The heating rate complies 175 (warm spark plug), best use for water cooled engines.
Made by NGK, Japan.
Bosch Nr. M175 T1
spanner gap: SW 21
11,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7529

Spark plug M18 - 225, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 225 (cold spark plug), best use for water and air cooled engines.
Made by NGK, Japan.
Bosch Nr. M225 T1
9,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7530

Spark plug M18 - 260, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines.
Made by NGK, Japan.
Bosch Nr. M260 T1
8,64 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7531

Spark plug M18 - 175, *ISOLATOR*

M18 spark plug. This part is an NOS spare part with thread M18 x 1,5mm.
The spanner gap is 26mm.
The heat rating is cose to 175. Can be used for wather cooled two stroke engines like Wartburg, Barkas, Framo, ZW1103
12,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1192

Brush for spark plugs

Brass brush for cleaning of spark plugs.
  • material: brass / wood
  • made in Germany
  • one piece will be needed
4,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8566
The complete offer in IFA engine

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas