This site in german: Trabant 1.1 > Ersatzteile > Motor > Zylinderkopf Trabant 1.1 > Ersatzteile > Motor > Zylinderkopf

> Trabant 1.1> Spare parts> Engine> cylinder head

Home | Impressum | Terms of business | Forums | Basket
* All prices inclusive VAT and plus shipping costs.

cylinder head

Home

Shop

Service

 






 The complete offer in cylinder head

Cylinder head packing * ELRING *

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
manufacturer: ELRING

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
25,83 €*
Art.No. 6327

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
14,38 €*
Art.No. 632

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed
3,15 €*
Art.No. 6407

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed
priece for each one: 2,60 Euro 26,00 €*
Art.No. 7360

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip *ELRING*

radial sealing for camshaft and one side (side of belt) of crankshaft
fit to Trabant 1.1 and Wartburg 1.3
made from ELRING

Best available type of Radial sealing 32 x 47 x 10 with additional dust lip, dual spin and higher working temperatur range.
  • inner diameter: 32 mm
  • outer diameter: 47 mm
  • width: 10 mm
  • material: Viton/Polyacryl-rubber
13,80 €*
Art.No. 6341

Radial sealing for camshaft and crankshaft( 32 x 47 x 10)

radial sealing for camshaft of Trabant 1.1 and Wartburg 1.3
The simplest and cheapest typ WITHOUT dust lip.
  • size: 32x47x10
  • made in Germany
5,55 €*
Art.No. 629

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip

radial sealing for camshaft and one side of crankshaft of Trabant 1.1 and Wartburg 1.3
more professional type of Art.No.629 (Radial sealing for camshaft (32 x 47 x 10)) with additional dust lip
  • size: 32x47x10
  • made in Germany
9,94 €*
Art.No. 6340

Seal for valve control machanisim cover

Simple kind of Sealing.
It can be used for Trabant 1.1 and Wartburg 1.3
Made in EU
6,93 €*
Art.No. 633

Seal for valve control machanisim cover *ELRING*

can be used for Trabant 1.1 and Wartburg 1.3
12,26 €*
Art.No. 6392

Seal set for valve control machanisim cover *ELRING*

can be used for Trabant 1.1 and Wartburg 1.3

with additional three rubber sleeves for mounting screws
17,59 €*
Art.No. 6393

threaded coupling for valve control machanisim cover (oil fill in hole)

can be used for Trabant 1.1 and Wartburg 1.3
6,10 €*
Art.No. 6217

Hydro cam follower

Hydro cam follower ist fito to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 and many other car models made by VW or Audi.

Technical data:
  • Outer diameter: 35 mm
  • Height: 26 mm
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces

If you can hear rattle for a while after starting the cold engine, mostly the hydro cam follower are worned out.
replaces no.: 034 109 309 AD Made in Germany by Febi Bilstein 12,73 €*
Art.No. 6831

valve stem sealing

Valve stem sealing can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.

If oil consumtion of engine is to much the wastage of valve stem sealings can be the reason.
8 pieces will be needed for one complete cylinder head (10 valves)
2,95 €*
Art.No. 6852

Valve guide

Valve guide is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.

Technical data:
  • Outer diameter: 12 mm
  • Inner diameter: 7,8 mm
  • Length: 36,5 mm
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
3,89 €*
Art.No. 6853

Spring cup seat for Valve

Spring cup for the inlet and the exhaust valve of the 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
4,75 €*
Art.No. 7132

Valve spring inner side

Insert spring (valve) is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Fit to the inlet and the exhaust valves
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
5,56 €*
Art.No. 7130

Valve spring outside

Insert spring (valve) is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Fit to the inlet and the exhaust valves
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
7,73 €*
Art.No. 7131

Inlet valve

Inlet valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
21,66 €*
Art.No. 6855

Exhaust valve

Exhaust valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
22,91 €*
Art.No. 6856

Valve chocks (1 pair)

Valve chock is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.

One pair of these valve chocks is fit to one valve with three grooves.
For one 4-cylinder-engine of Trabant or Wartburg will be needed 16 pieces.
2,63 €*
Art.No. 6854

Pin bolt for exhaust maifold

1,59 €*
Art.No. 7668

Pin bolt for suction pipe

1,55 €*
Art.No. 7667

sealing ring for suction pipe

2,66 €*
Art.No. 758

Suction pipe

Intake manifold with water cooling ports for the Trabant 1,1 and Wartburg 1,3 with carburettor engines. delivery without any mounting parts, seals ec.
  • Suction for all cylinders 1 in 4
  • material: aluminium
  • made in Germany
  • one piece will be needed
86,50 €*
Art.No. 759

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
1,87 €*
Art.No. 7484

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
3,95 €*
Art.No. 7482

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
49,65 €*
Art.No. 7262

Camshaft timing gear

timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
28,72 €*
Art.No. 7261

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
5,64 €*
Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
13,58 €*
Art.No. 6260
The complete offer in cylinder head
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas