IFA-vehicles > Wartburg 311 / 312 / 313

	IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Kühlsystem
> IFA-vehicles> Wartburg 311 / 312 / 313> Cooling system		Home \| Impressum \| Terms of business \| Forums \| Basket
	* All prices inclusive VAT and plus shipping costs. Cooling system

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Cooling system is spread over 2 sites: 1 - 2 (Show all products)

Coolant hose (310nmm) 3-way coolant petcock (W311) Detail coolant hose fit to both sideway tubes of 3-way coolant petcock lenght: 310mm (12,2") two pieces will be needed
Made in Germany	5,82 €* Art.No. 6913

Coolant hose (480mm) for sideway tubes of distributor (W311) Detail coolant hose fit to both sideway tubes of distributor lenght: 480mm (18,9") two pieces will be needed
Made in Germany	8,94 €* Art.No. 6914

Coolant hose, 15 x 3,5mm (yard goods)

Detail

rubber coolant hose with textile inset (DIN 73411 7/79)

up to 6 bar
Inner diameter: 15 mm (0,59 inch)
Thickness of wall: 3,5 mm (0,138 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.

Made in Germany

17,92 €*
Art.No. 6936

Coolant hose, 25 x 4,5mm (1 Meter)

Detail

Rubber coolant hose with textile inset (DIN 73411 7/79)

bup to 6 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 4,5 mm (0,177 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.

Made in Germany

29,86 €*
Art.No. 6917

Coolant hose, 25 x 3,5mm (1 Meter)

Detail

rubber coolant hose with textile inset (DIN 73411 issue 1955)

working pressure: 3 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 3,5 mm (0,138 inch)
Outer and inner layer made of black SBR-rubber quality
resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.

Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperature Fit to many veteran cars, for instance Wartburg 311

14,77 €*
Art.No. 6948

Valve for cooling water Detail Brass drain cock will be mounted direct on the motor block (exhaust side). Fit to: Wartburg 311, 312,313, 353, Framo, Barkas B1000.
25,90 €* Art.No. 6937

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Cooling system is spread over 2 sites: 1 - 2 (Show all products)

* All prices inclusive VAT and plus shipping costs.