This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Kühlsystem IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Kühlsystem

> IFA-vehicles> Wartburg 311 / 312 / 313> Cooling system

* All prices inclusive VAT and plus shipping costs.

Cooling system







The complete offer in Cooling system

Radiator end cap, crome, with strap, W311, Framo

Crome-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type inclusive tongue to fix an small retainer cain.
  • diameter of chrome-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
16,70 €*
Art.No. 7489

Radiator end cap, crome, W311, Framo

Zinc-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type without tongue.
  • diameter of zinc-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
13,70 €*
Art.No. 7491

Radiator end cap, zinc, with strap, W311, Framo

Zinc-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type inclusive tongue to fix an small retainer cain.
  • diameter of zinc-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
13,70 €*
Art.No. 6586

Radiator end cap, crome, W311, Framo

Crome-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type without tongue.
  • diameter of chrome-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
16,70 €*
Art.No. 7490

radiator end cap W311, Framo

zinc-coated end cap (seal) fit to radiator of Wartburg 311 and Framo
  • with additional pressed-on aluminium cover
  • diameter of aluminium cover with knurling: 100 mm
  • inner parts of seal cap made of zinc-coated sheet metall and brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
10,40 €*
Art.No. 6597

radiator flange W311, Framo

brass-fitting to solder on radiator
  • fit to Wartburg 311 and Framo
  • inner diameter (solder side): 40 mm
  • outer diamter (side of cap): 69 mm
  • height: 23 mm
Made in Germany
9,30 €*
Art.No. 6588

Coolant hose, 75mm, radiator-thermostat (W311)

Short piece of coolant hose to connect the upper pipe of radiator with thermostat

lenght: 75mm (2,95")
Made in Germany 2,72 €*
Art.No. 6911

Coolant hose, 60mm radiator-distributor (W311)

Short piece of coolant hose to connect the lower pipe of radiator with middle connection pipe of distributor

lenght: 60mm (2,36")
Made in Germany 2,18 €*
Art.No. 6916

Coolant hose, 195mm, distributor-water pump (W311)

Coolent hose fit to connect the distributor with water pump

length: 195mm (7,68")
Made in Germany 7,09 €*
Art.No. 6912

Coolant hose (310nmm) 3-way coolant petcock (W311)

coolant hose fit to both sideway tubes of 3-way coolant petcock
lenght: 310mm (12,2")

two pieces will be needed
Made in Germany 5,82 €*
Art.No. 6913

Coolant hose (480mm) for sideway tubes of distributor (W311)

coolant hose fit to both sideway tubes of distributor
lenght: 480mm (18,9")

two pieces will be needed
Made in Germany 8,94 €*
Art.No. 6914

Coolant hose, 15 x 3,5mm (yard goods)

rubber coolant hose with textile inset (DIN 73411 7/79)
  • up to 6 bar
  • Inner diameter: 15 mm (0,59 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.
Made in Germany 17,92 €*
Art.No. 6936

Coolant hose, 25 x 4,5mm (1 Meter)

Rubber coolant hose with textile inset (DIN 73411 7/79)
  • bup to 6 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.
Made in Germany
29,86 €*
Art.No. 6917

Coolant hose, 25 x 3,5mm (1 Meter)

rubber coolant hose with textile inset (DIN 73411 issue 1955)
  • working pressure: 3 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • Outer and inner layer made of black SBR-rubber quality
  • resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.
Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperature Fit to many veteran cars, for instance Wartburg 311
14,77 €*
Art.No. 6948

Valve for cooling water

Brass drain cock will be mounted direct on the motor block (exhaust side).
Fit to: Wartburg 311, 312,313, 353, Framo, Barkas B1000.
25,90 €*
Art.No. 6937
The complete offer in Cooling system
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas