This site in german: IFA-Fahrzeuge > Multicar M22 IFA-Fahrzeuge > Multicar M22

> IFA-vehicles> Multicar M22

Home | Impressum | Terms of business | Forums | Basket
* All prices inclusive VAT and plus shipping costs.

Multicar M22

Home

Shop

 

Service

 






 The complete offer in Multicar M22

distributor

2 pieces for each B1000 needed

material: brass
thread : M12 X 1
mounting-diameter: 8,4 mm
7,73 €*
Art.No. 6175

pipe-connector

4 pieces for each B1000 needed

galvanized
thread : M12 X 1
mounting-diameter: 8,4 mm
3,61 €*
Art.No. 6176

Wheel brake cylinder, rear (M22)

Wheel brake cylinder for the raer axle of Multicar M22
  • one piece for each wheel side
  • made in EU
29,64 €*
Art.No. 7196

Wheel brake cylinder, rear, M22, original

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, fit to the rear axle of the Multicar M22.
Mark: RENAK BZ
  • scope of delivery: inclusive ring sleeves and bleeder screw
  • break piston diameter: 25,35mm
  • two pieces will be needed

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak BZ 105 to our company in advance!
35,39 €*
Art.No. 7231

Ring sleeve, rear axle, original

Original ring sleeve set for rear wheel brake cylinder.
Fit to all models of: Multicar M22, Barkas, Wartburg 311, 312, 313 and Wartburg 353 with brake drum system at the front axle.
  • fit to brake cylinder diameter 25,35mm
  • Comlete set for one wheel brake cylinder: 2x cap sleeve, 2x dust cap
  • temporary only the inner parts made in Germany in high quality, outer parts made in Hungary
  • material: break fluid resistant rubber
  • One set will be needed for each wheel side rear
14,73 €*
Art.No. 7232

Bleeder screw, rear

Bleeder screw for rear wheel brake cylinder B1000 and Multicar M22 - M25
2,46 €*
Art.No. 6081

Hexagon bolt for wheel brake cylinder

Hexagon bolt M6 x 14 mm 10.9 for wheel brake cylinder front and rear axle
complete with spring washer.
front axle each wheel side 4 pieces
rear axle each wheel side 1 piece
0,25 €*
Art.No. 6282

Brake master cylinder, 1 circle (+80€ pledge)

Complete in Germany overhauled brake master cylinder.
Type: Renak CH
Shipping only after your old brake cylinder with the mark IFA BH1 was send to our company.
Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo.
  • piston diameter: 25,4mm
+80,00 € pledge for old brake master cylinder
128,17 €*
Art.No. 7221

Sleeve set for brake master cylinder (1-circuit) Ø 25,4mm = 1

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311.
  • for diameter of piston: 25,4 mm
  • scope of delivery: two piece of ring sleeve
  • one piece is needed for each wheel brake cylinder
  • first-class quality made in Germany
19,50 €*
Art.No. 7176

Protection bellows for pressure bar input brake master cylinder

Protection bellows for the single and tandem brake master cylinders.
fit ot vehicles: Framo, B1000, B1000-1, Wartburg 311, 312, 313, 353, Multicar M22, M24, M25.

inner diameter conical end: 15 mm
inner diameter cylindrical end: 37 mm
length: 35 mm - 58 mm
6,89 €*
Art.No. 4214

Sealing ring for wheel brake cylinder, front axle M22 (1 pair = 2 pieces)

Two sealing rings for the wheel brake cylinders built in front brake of Multicar M22.
  • for diameter of piston: 27 mm
  • scope of delivery: two piece of ring sleeve
  • one piece is needed for each wheel brake cylinder
  • first-class quality made in Germany
8,73 €*
Art.No. 7386

wheel brake cylinder front axle, right, M22

Complete in Germany overhauled wheel brake cylinder.
Fit to Multicar M22 front axle right hand.
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark CZ 25 to our company in advance!
This part is only to exchange for the old one.
32,50 €*
Art.No. 7385

wheel brake cylinder front axle, left, M22

Complete in Germany overhauled wheel brake cylinder.
Fit to Multicar M22 front axle left hand
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark CZ 25 to our company in advance!
This part is only to exchange for the old one.
32,50 €*
Art.No. 7384

Brake hose front axle

Flexible brake hose for the front axle.
  • total length: 49 cm
  • tap: 1x M12 x 1,5 core thread
  • 1x M12 x 1,5 male thread
8,48 €*
Art.No. 7518

Bleeder screw, M12x1

Bleeder screw for many IFA vehicles. Tap M12 x 1 with selaing cone 90 degrees.
Fit to:
  • Barkas B1000
  • Barkas B1000-1
  • Multicar M22
  • Multicar M24
  • Multicar M25
  • Wartburg 311 and 313
3,74 €*
Art.No. 6121

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,35 €*
Art.No. 215

release spring for brake shoes, long

long version of release spring for break shoes
3,18 €*
Art.No. 7197

release spring for brake shoes, short (M22)

short version of release spring for break shoes
2,94 €*
Art.No. 7198

Sliding piece for rear brake shoe (M22)

Sliding piece for rear brake shoe Multicar M22
two pieces for each wheel side
9,87 €*
Art.No. 7199

Split pin 3,2 x 16

Split pin can be used for brake-shoes rear axle.
Two pieces for each wheel side.
0,19 €*
Art.No. 6285

left thrust rod for brake shoes

thrust rod fit to the left side of rear wheel brake

fit to follow brake systems:
  • left brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
  • left brake drum front axle B1000 (one piece)
  • left brake drum rear axle Multicar M22 (one piece)
9,96 €*
Art.No. 6472

rigth thrust rod for brake shoes

thrust rod fit to the right side of rear wheel brake

fit to follow brake systems:
  • rigth brake drum rear axle Wartburg 353 with brake shoe wide of 50mm (one piece)
  • right brake drum front axle B1000 (one piece)
  • rigth brake drum rear axle Multicar M22 (one piece)
19,96 €*temporary not available
Art.No. 6471

Sleeve set for clutch cylinder pedal side

Sleeves for the clutch cylinder of the Barkas B1000 and Multicar M22. Fit to all two stroke models of Barkas with hydraulic clutch system.
Set consist of 1x ring sleeve and 1x cap sleeve.
  • made in Germany
  • genuine spare part
  • one set will be needed
8,50 €*
Art.No. 7169

Clutch cylinder pedal side

Overhauled clutch cylinder for the Barkas B1000. Fit to all two stroke models with hydraulic clutch system. Also fit to Multicar M22.
Please note, we can only exchange you this spare part if you ship 1x Cluch cylinder type BH7 to our company in advance!
  • overhauled in Germany
  • genuine spare part
  • one piece will be needed
55,00 €*
Art.No. 7166

Clutch cylinder gearbox side

Overhauled clutch cylinder for the Multicar M22. Fit to all two stroke models with hydraulic clutch system.
Please note, we can only exchange you this spare part if you ship 1x Cluch cylinder type BH7 to our company in advance!
  • overhauled in Germany
  • genuine spare part
  • one piece will be needed
57,40 €*
Art.No. 7527

Sleeve for clutch cylinder gearbox side (M22)

Ring sleeve for the clutch cylinder release fork of the Multicar M22. Fit to all two stroke models with hydraulic clutch system.
  • made in Germany
  • genuine spare part
  • one set will be needed
4,50 €*
Art.No. 7528

Starter for Multicar M20/M22

Starter fit to the following cars: Multicar M20, M22 and LO
Also fit to IFA-engine 2KVD8
  • overhauled in Germany
  • your old starter have to be first shipped to our company for exchange
genuine part no.: 8202.1 179,00 €*
Art.No. 7216

Rubber sealing cap for front direction indicator lamp (P50/P60/B1000/Multicar)

New produced sealing cap fit to old front flasher lights of Trabant 500 and 600 (P50/60), Barkas B1000 and Multicar truck and fit to Wartburg 311,312,313 and Framo, and fit to the side lights of the camp trailer INTERCAMP.
9,33 €*
Art.No. 7250

Spare key, copy is made from yor key number

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.
  • delivery time about one to two weeks
  • all Trabant keys possible
Please write here your keynumber in:
15,50 €*
Art.No. 1341
Delivery only at advance payment.

Cap for water vessel for windscreen washer system

Plastic cap with mounting sprap for the water bottle of the windscreen washer system.
The plug close up the refilling hole.
To use at many reservoir bottles with electrical or mechanical pump.

fit to follow washer systems:
Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €*
Art.No. 7357

Universal brake line, CUNIFER 5m, 6mm

Brakepipeline 6 x 0,7 mm
made of NiCuFe
length: 5m
for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m 42,99 €*
Art.No. 7398

Protection cap for starter lite ( plastic )

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
  • made in Germany
  • one piece will be needed
2,28 €*
Art.No. 786

Hose connector 19mm, universal

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:
  • diameter: 19mm
  • lenght of the connection side: 32mm
  • legth total: 75mm
  • material: plastic, temperatur and oel restistant, whithe
2,50 €*
Art.No. 7432

compensating tank complete, universal

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines
41,98 €*
Art.No. 7430

Fog lamp angular

Rectangular fog light as very good replacement for the original lights.
High quality made in Germany.
The sizes agree with the genuine spare parts.
technical details:
  • voltage: 12V oder 24V, bulb type: H3
  • dimensions: 160mm x 90mm
  • scope of delivery without bulb, inclusive mounting parts
  • the case of the lamp is mad of plastic, black

Can be used for Trabant, Wartburg, B1000 und Multicar.
32,70 €*
Art.No. 7431

Seal for head lamp

Sealing for the rear side of the head lamps of the Wartburg 353 form vintage 6-85 with front radiator and Wartburg 1,3.
The rubber seal save the lights against dust and splash water.
  • original spare part
  • material rubber: grey-green
  • outside diameter: 77mm
  • original spare part number: 8704.38-2:2/4
  • two pieces will be needed
1,47 €*
Art.No. 7526

Ring eye D12mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
  • pipe bend: 90 degree
  • pipe length total: 74mm
3,59 €*
Art.No. 7517

Ring eye D12mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 6mm
2,49 €*
Art.No. 7539

Ring eye D12mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
2,49 €*
Art.No. 7540

Ring eye D10mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
  • pipe bend: 90 degree
  • pipe length total: 55mm
3,29 €*
Art.No. 7516

Ring eye D10mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
2,48 €*
Art.No. 7537

Ring eye D10mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 8mm
2,48 €*
Art.No. 7538

Rubber lining for brake and clutch pedal-shaft

  • material: rubber, black
  • made in EU
  • two pieces will be needed
3,50 €*
Art.No. 7519

Protection bellows for pressure bar input clutch master cylinder

3,95 €*
Art.No. 7520

Universal brake line, PVC-coated per 1 m , 6 x 0,7 mm

Brakepipeline 6mm x 0,7mm for Barkas B1000
price per meter.
max. lenght per piece: 5m
3,55 €*
Art.No. 6038

Universal brake line 6x0,7 *5m*

Zinced and PVC-plated steel brake line.
Scope of delivery 5 meters.
The pipe can be bent by hand with normal pressure. For the flange on the end of the tubes it will be necessary to use an professional tube border tool.
  • outside diameter: 6mm
  • thickness: 0,7mm
  • length: 5m
  • made in Germany
price per meter: 32,4 € 16,21 €*
Art.No. 6039

Screw-cap for brakeline 6 x 0,7

Screw-cap for brakeline 6mm x 0,7mm
Barkas B-1000

thread: M12x1
1,00 €*
Art.No. 7276

Brake hose rear, fit to Multicar

Wheel brake hose for the rear brake system of the Multicar type M22, M24, M25.
Connection hose between the brake pipe and the wheel brake cylinder rear axle.
  • total lenght: 51cm
  • thread: M12x1, both ends as male type
  • delivery as an single part
  • made in EU
  • for one vehicle two pieces will be needed
8,50 €*
Art.No. 7641
The complete offer in Multicar M22
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas