This site in german: Trabant 601 > Ersatzteile > Karosserie > Motorraum 
You are here: > Trabant 601> Spare parts> Body> Engine compartment
Navigation

spare parts for the engine compartment Trabant 601

The product category Trabant 601 > Spare parts > Body > Engine compartment is spread over 4 sites:

1234
Show all products

Engine bonnet

Trabant 601 engine bonnet. Single part without isulation material and strutting.
Original spare part.
175,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 400

Bonnet reinforcement

89,99 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 398

Dolphin pile for engine bonnet

self-adhesive sound absorbing mat for engine bonnet
  • with polyurethane surface coating
  • colour: grey
  • content: 2x mat with 500 x 1000mm (=1qm)
Price: 134,32 Euro / m²
134,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6751

Bonnet prop

Trabant 601 bonnet prop. Delivery without mounting pins.
Fit to Trabant 601 and some of Trabant 1,1 types.
36,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 402

Lock for engine bonnet

Two-stage bonnet lock for the Trabant 601 and Trabant 1,1 engine bonnet.
  • original spare part
  • delivery as single part with out any mounting parts
  • one piece will be needed
48,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 395

Bowden cable for bonnet look

Bonnet opener cable is mounted at the one side with an screw joint at the bonnet look an on the other hand thru the bulkhead left side down under the instrument panel.
  • lenght comlete: 1540 mm
  • lenght of bowden cable: 1385 mm
  • diameter of steel wire: 1,5 mm
  • diameter bowden cable: 5,5 mm
  • scope of delivery without plastic opener
  • one piece will be needed
28,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 748

Bowden cable for bonnet look (EU reproduction)

Bonnet opener cable is mounted at the one side with an screw joint at the bonnet look an on the other hand thru the bulkhead left side down under the instrument panel.
Made in EU.
  • lenght comlete: 1540 mm
  • lenght of bowden cable: 1385 mm
  • diameter of steel wire: 1,5 mm
  • diameter bowden cable: 5,5 mm
  • scope of delivery without plastic opener
  • one piece will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8461

Handle for bowden cable bonnet look

Plasic handle for bonnet opener cable.
Mounting place: thru the bulkhead left side down under the instrument panel.
  • Material: plasic, black
  • original spare part
  • one piece will be needed
8,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8441

Button pad, black

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour black
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 404

Button pad, grey

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour grey
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8225

Button pad, beige

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour beige
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8226
The product category Trabant 601 > Spare parts > Body > Engine compartment is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas