This site in german: Trabant 1.1 > Ersatzteile > Motor > Zylinderkopf 
You are here: > Trabant 1.1> Spare parts> Engine> cylinder head
Navigation

cylinder head

The product category Trabant 1.1 > Spare parts > Engine > cylinder head is spread over 4 sites:

1234
Show all products

Cylinder head packing * ELRING *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: ELRING
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed

Special tools required for disassembly/assembly:
39,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6327
Delivery only at advance payment.

Cylinder head packing * REINZ *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: VIKTOR REINZ Germay
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed

Special tools required for disassembly/assembly:
42,89 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8198

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
If the cylinder head packing will be replaced, you should use new expansion bolts as well!
  • one piece will be needed

Special tools required for disassembly/assembly:
17,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 632
Delivery only at advance payment.

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed

Special tools required for disassembly/assembly:
priece for each one: 3,53 Euro
35,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7360
Delivery only at advance payment.

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed

Special tools required for disassembly/assembly:
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6407
Delivery only at advance payment.

Socket wrench for cylinder head bolts

Socket wrench to dismantle or assemble the expansion bolts at the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 engine with 4 stroke four cylinder motor.
16,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8739
Delivery only at advance payment.

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip *ELRING*

radial sealing for camshaft and one side (side of belt) of crankshaft
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
Made by ELRING

Best available type of Radial sealing 32 x 47 x 10 with additional dust lip, dual spin and higher working temperatur range.
  • inner diameter: 32 mm
  • outer diameter: 47 mm
  • width: 10 mm
  • material: Viton/Polyacryl-rubber
13,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6341
Delivery only at advance payment.

Radial sealing for camshaft and crankshaft( 32 x 47 x 10)

radial sealing for camshaft of Trabant 1.1 and Wartburg 1.3
The simplest and cheapest typ WITHOUT dust lip.
  • size: 32x47x10
  • made in Germany
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 629

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip

radial sealing for camshaft and one side of crankshaft of Trabant 1.1 and Wartburg 1.3
more professional type of Art.No.629 (Radial sealing for camshaft (32 x 47 x 10)) with additional dust lip
  • size: 32x47x10
  • made in Germany
9,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6340

Seal for valve control machanisim cover

Simple kind of Sealing.
It can be used for Trabant 1.1 and Wartburg 1.3
Made in EU
8,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 633

Seal for valve control machanisim cover *ELRING*

Sealing made of rubber can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • best quality made by Elring
  • one piece will be needed
14,16 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6392
Delivery only at advance payment.

Seal set for valve control machanisim cover *ELRING*

This seal kit can be used for Trabant 1.1 and Wartburg 1.3 or Barkas B100-1 (4-stroke engine)
  • This set contains the with additional three rubber sleeves for mounting screws
  • Material: Öl-restisrant rubber
  • made by ELRING
  • one set will be needed
17,59 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6393
Delivery only at advance payment.
The product category Trabant 1.1 > Spare parts > Engine > cylinder head is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas