This site in german: Wartburg 353 > Ersatzteile > Getriebe Wartburg 353 > Ersatzteile > Getriebe

> Wartburg 353> Spare parts> gearbox

Home | Impressum | Terms of business | Forums | Basket
* All prices inclusive VAT and plus shipping costs.

Gearbox spare parts, add-on-components and accessories

Home

Shop

Service

 






 The complete offer in Gearbox spare parts, add-on-components and accessories

Transmission suspension gear box

Rubber spring for gearbox Wartburg 353
one side with mounting nuts and the other side with drill hole.
  • ZAK No. 1464411253682640
  • one piece will be needed
15,98 €*
Art.No. 7049

Cluch cable complete

Bowdencable with grease nipple for the Wartburg 353 cluch. Fit to all models.
  • total length: 55 cm
  • lenght of the cover: 29 cm
  • made in EU
10,80 €*
Art.No. 3110

sleeve for cluch cable

sleeve for clutch cable of Wartburg 353 (2-stroke) and Wartburg 1.3 (4-stroke)
  • length: 90mm
  • lenght (short): ca. 55mm
  • inner diameter big: 12mm
  • inner diameter small: ca. 6mm


Subject to availability (no regular range)!
8,80 €*
Art.No. 6370

Collar for gear shifting shaft

Sealing sleeve mounted on top of the gearbox to save the gear change shaft.
Fit to all Wartburg 311, 312, 313 and 353 without vintage limit.
  • Material: rubber
  • one piece will be needed for intake gear change shaft (all types)
  • two pieces will be needed for gear change mechanism of stick shift mechanism fit to Wartburg 353
  • original number: 53080001008
5,83 €*
Art.No. 6981

steering-column gear change

control lever of gear change mechanism

control lever for gear shift mechanism inside steering column for Wartburg 353

delivery with sleeve rubber between control lever and gear casing
25,90 €*temporary not available
Art.No. 7018

sleeve for control lever of gear change mechanism

sleeve rubber between control lever and gear casing inside steering column

made of black rubber
4,60 €*
Art.No. 6776

Selector rod of gear change mechanism

Selector rod of gear change mechanism for Wartburg 353

delivery with rubber cap, gear shift lever with plastic ball joint (from May 1986 onwards) and rubber roller
subject to availability
26,47 €*
Art.No. 7022

Rubber roller for selector rod of gear change mechanism

Rubber roller fit to selector rod of steering column gear change mechanism of Wartburg 353
  • made of black rubber
  • for both variants of selector rod (with ball joint made of plastic or steel)
  • height: 12 mm
  • outer diameter: 37 mm
  • smallest inner diameter of conical hole: 9,5 mm
  • genuine part IFA
subject to availability Part.-No. 53 08003 805
4,77 €*
Art.No. 7085

Ball joint for gear shifting

The Ball-pin is mounted on top of the gear change shaft.
Fit to all Wartburg 353 from vintage May 1986
  • Material: plastic
  • original spare part
  • Original number: 5301315801
4,00 €*
Art.No. 6980

Half of bearing bush

One half of Bearing bush for gear shift column next to bearing bush for steering column
  • made of plastic
  • only fit to Wartburg 353 with steering column gear change
Parts-No.: 53 01308 706
3,11 €*
Art.No. 7061

Profile piece for rocking arm unit

Profile piece to mount at rocking arm fit to gear change mechanism of steering column gear change
  • made of plastic
  • only fit to Wartburg 353 with steering column gear change
Parts-No.: 53 01313 301
6,77 €*
Art.No. 7079

Steering column packing

Rubber seal for the Wartburg 353 steering column.
Fit to cars with steering column gear change.
  • material: rubber, black
  • without mounting parts
  • original spare part
Parts-No.: 53 01314 407
9,50 €*
Art.No. 7453

Rocking arm unit up to august 1986

Rocking arm fit to gear change mechanism of steering column gear change
  • only fit to Wartburg 353 with steering column gear change
Parts-No.: 53 01352 420
28,89 €*
Art.No. 7435

Rocking arm unit from august 1986

Rocking arm fit to gear change mechanism of steering column gear change
  • only fit to Wartburg 353 with steering column gear change
Parts-No.: 53 01352 308
28,89 €*
Art.No. 7078

Gear shift bar

complete gear shift bar for gear shift mechanism inside steering column for Wartburg 353
To connect control lever of gearbox side with Selector rod of gear change mechanism
delivery with plastic ball socket and rubber roller
12,50 €*temporary not available
Art.No. 7041

Ball socket for gear shift bar

Plastic ball socket for the gear shift bar of the gear shift mechanism inside steering column for Wartburg 353.
To connect control lever of gearbox side with Selector rod of gear change mechanism
  • material: plastic
  • one piece will be needed
3,29 €*
Art.No. 7434

Rubber ring for gear shift bar

Single part of the complete gear shift bar for gear shift mechanism inside steering column for Wartburg 353.
The ring will be mounted inside of the eye of the bar.
  • material: rubber, black
  • one piece will be needed
6,50 €*
Art.No. 7433

Half of bearing bush

One half of bearing bush for gear shift column next to bearing bush for steering column
  • made of plastic
  • fit to Wartburg 353 with steering column gear change and stick shift
  • two pieces will be needed for control lever of gear change mechanism with steering column gear change
  • four pieces will be needed for Wartburg 353 with stick shift (one pair for lower side of gear change lever and another pair for backside bearing of gear change rod)
Parts-No.: 53 01306 407 4,35 €*
Art.No. 7062

Stick shift mechanism

sleeve for floor gear change mechanism

sleeve for floor gear change mechanism

made of black rubber
5,60 €*temporary not available
Art.No. 6387

Rubber ring for floor gear change mechanism (W353)

Rubber ring to locate the bearing bush of stick to use with stick shift mechanism of Wartburg 353
  • made of black rubber
  • height: 10 mm
  • inner diameter (locator of bearing bush): ca. 20 mm
  • outer diamter: 42 mm
  • outer diameter of circumferetial slot: 34 mm
  • one piece will be needed for each gear change mechanism
Part-No. 53 08001 6002
7,91 €*temporary not available
Art.No. 7084

ball ring for floor gear change mechanism

ball ring to use with stick shift mechanism
  • made of grey plastic
  • inner diamter of hole: 10,2 mm
  • biggest outer diamater: 21,6 mm
  • height: 12 mm
  • one piece will be needed for each gear change mechanism
Part-No. 53 03703 802
3,14 €*
Art.No. 7082

Bearing bush for floor gear change mechanism (W353)

Bearing bush to use with stick shift mechanism of Wartburg 353
This bearing bush will be held by rubber ring inside top cover.
One Collar for gear shifting shaft will be mounted on outer rim of this bush.
  • made of steel
  • length: 22 mm
  • diameter of hole: 12 mm
  • one piece will be needed for each gear change mechanism
Part-No. 53 03703 802
12,50 €*temporary not available
Art.No. 7083

Cable for freewheel

Bowdencable for freewheel control on gearbox of Wartburg 353.
  • total length: 93 cm
  • lenght of the cover: 55,5 cm
  • original spare part
17,41 €*
Art.No. 6767

ADDINOL gear box oil GS80W (GL60), 1 Litre

High-end-car-gearbox oil for Wartburg 353, Barkas B1000 and other vehicles
Made of german high-quality producer ADDINOL
  • for usability in countrys with central european weather (with a cold winter)
  • needed volume for one gearbox of Wartburg 353: 1,8 Litre
  • needed volume for one gearbox of Barkas B1000: 2,75 Litre
  • corresponds with the old name of viskosity: GL60 (SAE 80 EP)
  • SAE 80W; API GL-4; MIL-L-2105

homologations:
  • Mercedes-Benz 235.1
  • MAN 341
  • ZF TE-ML 02 A, 17A

application:
  • Hypoid gears with small offset
  • manual gear change-, steering- and distributing gear boxes
5,72 €*
Art.No. 6620

ADDINOL gear box oil GS80W90 (GL125), 1 Litre

High-end-car-gearbox oil for Wartburg 353 and others vehicles
Made of german high-quality producer ADDINOL
  • for usability in countrys with mediterranean or tropical weather
  • needed volume for one gearbox of Wartburg 353: 1,8 Litre
  • corresponds with the old name of viskosity: GL125 (SAE 90 EP)
  • SAE 80W-90; API GL-4; MIL-L-2105

application:
  • Hypoid gears with small offset
  • manual gear change-, steering- and distributing gear boxes
5,75 €*
Art.No. 6619

Shaft seal - gearbox main shaft

Radial oel seal for the clutch shaft Wartburg 353 gearbox.
  • size: D24 x 40 x 7
  • material: NBR (Nitril-rubber)
  • with additional dust lip
  • made in Germany
  • one piece will be needed
4,52 €*
Art.No. 6531

Shaft seal - universal shaft

Radial oel seal for wheel side he drive Wartburg 353 gearbox.
  • size: 45 x 60 x 7
  • material: NBR (Nitril-rubber)
  • with additional dust lip
  • made in Germany
  • two pieces will be needed (one for each drive shaft)
8,77 €*
Art.No. 7002

Shaft seal - gearbox final drive

Radial oel seal for the final drive Wartburg 353 gearbox.
  • size: 75 x 100 x 10
  • material: NBR (Nitril-rubber)
  • with additional dust lip
  • made in Germany
  • two pieces will be needed
10,83 €*
Art.No. 6532

Clutch release bearing W353 up to 6/85; B1000 up to 02/1985

Clutch release bearing for cluch fit to the following car:
  • Wartburg 353, up to year 06/1985
  • Barkas B1000, up to 02/1985 (in tandem with clutch disc with diameter of 180 mm)
Made in Germany
34,13 €*
Art.No. 3104

Clutch release bearing from 6/85

letest version of clutch release bearing for Wartburg 353
  • made in Europe
  • fit to all Wartburgs from vintage June 1985 onwards
34,15 €*
Art.No. 3105

Spring fpr clutch release bearing from 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Fir to the following car types:
Wartburg 353 ab 6-1985 Limousine and Tourist
Trabant 1,1 without vintage limit Kombi and Limousine
Wartburg 1,3 without vintage limit Tourist and Limousine
Barkas B1000 ab 3-85 with clutch D=200mm
Barkas B1000-1 without vintage limit
2,49 €*
Art.No. 7328

Freewheel cam with cylindric rolls

cam for freewheel for Wartburg gearbox up to vintage: november 1986.
Mounting without woodruff key.
  • original spare part
  • scope of delivery without cage and torsion spring
  • incl. 10 cylindric rolls
  • one piece will be needed
53,50 €*
Art.No. 6389

Freewheel crate complete, up to 11-86

cam for freewheel for Wartburg gearbox up to vintage: november 1986.
Mounting without woodruff key.
  • made in Europe
  • scope of delivery inclusive cage, spring, 10x cylindrical roller
  • piece will be needed
74,20 €*
Art.No. 7295

Freewheel crate complete, from 11-86

cam for freewheel for Wartburg gearbox from vintage: november 1986.
Mounting with woodruff key.
  • original spare part
  • scope of delivery inclusive cage, torsion spring and 10 cylindric rolls
  • one piece will be needed
95,00 €*temporary not available
Art.No. 3144

Cylindrical roller for freewheel 9x14

Single part of the cylindrical roller for the freewheel of the Wartburg 353 (old and later type of gearboxes.
  • 12 pieces will be needed
  • zero mark: diameter 9,00mm
  • length: 14mm
  • made in Germany
price for each one 2,54 €*
Art.No. 7393

Sleeve rubber ( outer universal shaft side )

For each drive shaft two pieces will be needed.
This oel (Art.-Nr.:6619) have to be used for the lubication of the outer joint.
  • material: rubber, black
  • made in EU
  • additional mounting part band clamp-set
4,20 €*
Art.No. 3147

Sleeve rubber ( inner side )

Rubber sleeve gearbox side for the right and left universal shaft.
  • two pieces will be needed
4,50 €*
Art.No. 3148

Snap ring sleeve rubber final drive

Circlip for mounting at the Wartburg 353 and Wartburg 1,3 drive shaft boot.
Can be used at the inner sleeve of the outside joint.
Two piece will be needed for each car.
1,95 €*
Art.No. 7680

Band clamp set for sleeve rubber of universal shaft

Rebound strap set for mounting of sleeve rubbers of universal shafts
consist of:
  • long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
  • short band clamp to seal sleeve rubber on universal shaft, for diameter from 25mm up to 50mm

application:
  • the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
  • fixing this position by hooking into
  • spanning the band clamp with a pincers
  • ready
3,82 €*
Art.No. 6394

Band clamp , long

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:
  • the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
  • fixing this position by hooking into
  • spanning the band clamp with a pincers
  • ready
2,55 €*
Art.No. 6408

Band clamp, short

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 25mm up to 50mm
application:
  • the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
  • fixing this position by hooking into
  • spanning the band clamp with a pincers
  • ready
2,11 €*
Art.No. 6536

Rebound strap 4,6 X 360 mm

Strap for rubber sleeves.
  • material: stainless steel
  • made in Germany
  • 4 pieces will be needed
2,48 €*
Art.No. 655

Flexible shaft for speedometer

Flexible shaft for speedometer fit to all Wartburg 353 and Wartburg 1,3.
  • total lenght of the shaft: 1170 mm
  • both ends are with tetrahedral tappet: 2,6 x 2,6 mm
  • connection screw joint: aluminium-nut
  • one piece will be needed
9,89 €*
Art.No. 3500

Tapered roller bearing 3308 D

Two row grooved ball bearing, fit to the Wartburg 353 gearbox:
1x for bevel gear shaft
  • mark: 3308
  • TNG TGL 2982
  • outside diameter: 90mm
  • inside diameter:40mm
  • width: 36,5mm
  • made by: DKF (DDR)
  • 1x Tapered roller bearings will be needed
15,50 €*
Art.No. 6865

shaft spider for transmission shaft, W353, new type

Complete spare part shaft spider for the Wartburg 353 drive shaft, from to vintage May 1986
Right and left side mountable.
Teeth at the drive shaft: 22
  • diameter spiderring: 27mm
  • diameter spider: about 66mm
  • For each universal shaft one piece will be needed
  • length of the tooth piece: 35mm
  • original spare part
52,43 €*
Art.No. 7341

shaft spider for transmission shaft, W353, old type

Complete spare part shaft spider for the Wartburg 353 drive shaft, up to vintage May 1986
Right and left side mountable.
Teeth at the drive shaft: 22
  • diameter spiderring: 27mm
  • diameter spider: about 66mm
  • For each universal shaft one piece will be needed
  • length of the tooth piece: 25,5mm
  • original spare part
52,43 €*
Art.No. 7340

Transmission shaft, W353 secound hand part

Dirve shaft Wartburg 353 as an checked extension element.
Right and left side mountable.
Scope of delivery inclusive spider.
Please choose at the window the car vintage.

135,00 €*
Art.No. 7542
The complete offer in Gearbox spare parts, add-on-components and accessories
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas