This site in german: Wartburg 353 > Ersatzteile > Motor > Kühlsystem Wartburg 353 > Ersatzteile > Motor > Kühlsystem

> Wartburg 353> Spare parts> Engine> cooling system

Home | Impressum | Terms of business | Forums | Basket
* All prices inclusive VAT and plus shipping costs.

cooling system

Home

Shop

Service

 






 The complete offer in cooling system

Thermostat

Fit to all Wartburg 353 and Barkas with 3 cylinder two stroke engine.
  • incl. sealing ring
  • Thermostat opens by 82°C
  • one piece will be needed
11,87 €*
Art.No. 3135

Sealing ring for thermostat

Sealing ring made of black rubber fit thermostat of all Wartburg 353 and Barkas B1000 with 3 cylinder two stroke engine.
[mad in Germany][one piece will be needed]}
Special offer normaly 3.33€ now 2,77 €*
Art.No. 7007

Bolt for thermostat case

Hexagon bolt for the Thermostat manifold fit to all Wartburg 353 and B1000 two stroke engine
  • delivery inclusive washer
  • three pieces will be needed
0,92 €*
Art.No. 6858

Seal for thermostat case

Thermostatseal fit to all Wartburg 353 and B1000 two stroke engine
  • material: seal-paper
  • one piece will be needed
2,20 €*
Art.No. 3136

Bolt for pump housing

Hexagon bolt for the water pump case fit to all Wartburg 353 and B1000 two stroke engine
  • delivery inclusive washer
  • six pieces will be needed
0,92 €*
Art.No. 6859

Coolant GLYSANTIN® Protect Plus, frost protection agent

coolant concentrate Protect Plus (G48), suitable for all popular makes of car
quality engine coolant such as Glysantin® Protect Plus provides all-season:
  • Corrosion protection
  • Overheating protection
  • Frost protection
  • Neutrality to rubber and plastics
  • Low foaming tendency
  • High chemical stability

Fit to the most coolant systems, for instance of Wartburg 353 and 1.3, Trabant 1.1 and Barkas B1000(-1).

Mixable with coolant G11 from Volkswagen.
NOT mixable with coolant G12 from Volkswagen!
13,81 €*
Art.No. 6716

sensor for temperature

Transmitter for temperature indication

thread: M14 x 1,5
width across flats: 19mm
Original-parts-no.: 91 05000 094
23,95 €*
Art.No. 6554

gasket ring of sensor for temperature

Aluminium ring for the temperature sensor mounted in cylinder head of 2-stroke engine of Wartburg 353 and barkas B1000.
  • outer-diameter: 20 mm
  • inner-diamter: 14 mm
  • thickness: 1,5 mm
Original-parts-no.: 99 00109 450
0,18 €*
Art.No. 6565

Snap ring for grooved ball bearing

Circlip for grooved ball bearing 6301 for shaft of water pump Wartburg 353 and B1000 (2-stroke)
0,98 €*
Art.No. 6537

Fitted key 3 x 3,7

Fitted key (3 x 3,7) for fan-shaft and shaft of water pump
  • B1000: three pieces needed for complete fan-shaft
  • B1000 / W353: two pieces needed for shaft of waterpump
0,88 €*
Art.No. 6304

V-belt pulley, plastic W353

V-belt pulley for shaft of water pump (in cylinder head of Wartburg 353)
13,44 €*
Art.No. 6584

grooved ball bearing for Fan-shaft and water pump shaft

grooved ball bearing for shaft of water pump and fan shaft
for Wartburg 353 and B1000 (2-stroke)
  • high quality made by FAG
  • size: 12 x 37 x 12
  • for the water pump shaft of the Wartburg 353 and Barkas B1000: two pieces are needed
  • for the Fan shaft Barkas one piece will be needed
9,44 €*
Art.No. 6298

Fan wheel water pump up to 5/85

The waterpump wheel fit to Wartburg 353 (up to vintage Mai 1985) with three cylinder 2-stroke engine
  • 1x fan wheel with 2xmetal ring for membran sealing
  • made in Europe
23,55 €*
Art.No. 7344

fan wheel water pump from 5/85

Waterpump wheel fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
  • 1x fan wheel with 2xmetal ring for membran sealing
  • made in Europe
19,50 €*
Art.No. 7345

Water pump shaft 42cm up to 5/85

Transmission shaft for cooling pump at the cylinder head of the Wartburg 353 Limousine, Tourist or Trabs (up to vintage Mai 1985) with three cylinder 2-stroke engine
  • material: steel
  • with knurling for fan
  • Original spare part
  • length total: 42cm
  • one piece will be needed
68,00 €*
Art.No. 7382

Water pump shaft from 6-85

Transmission shaft for cooling pump at the cylinder head of the Wartburg 353 Limousine, Tourist or Trabs (up to vintage June 1985) with three cylinder 2-stroke engine.
Wartburg type with radiator in front of the engine an elektrical cooling fan.
  • material: steel
  • Original spare part
  • length total: 38cm
  • one piece will be needed
68,00 €*
Art.No. 7383

Spare kit for water pump up to 5/85

fit to Wartburg 353 (up to vintage Mai 1985) with three cylinder 2-stroke engine
complete set consist of:
  • 1x fan wheel
  • 2x membran gasket compl.
  • 2x cover disc for ball bearings
  • 1x gasket for ball bearing (rubber), side of belt pulley
  • 1x distance bush (inner bush)
  • 1x O-ring
  • one set will be needed
85,29 €*
Art.No. 3137

Spare kit for water pump from 5/85

fit to Wartburg 353 (from vintage Mai 1985) and all Barkas B1000 (3 cylinder 2-stroke engine)
complete set consist of:
  • 1x fan wheel
  • 1x membran gasket compl.
  • 2x cover disc for ball bearings
  • 1x gasket for ball bearing (rubber), side of belt pulley
  • 1x distance bush (inner bush)
  • 1x O-ring
  • one set will be needed
68,67 €*
Art.No. 3138

Sealing for water pump

Speacial seling system for the water pump inside the cylinder head of the Warturg 353 and Barkas B1000.
  • made in Europe
  • inclusive rubber seal
  • for Wartburg 353 up to 5-85 will be two pieces needed
  • for Wartburg 353 from to 5-85 and Barkas B1000 will be one piece needed
34,50 €*
Art.No. 6770

Seal for water pump

Waterpump seal fit to all Wartburg 353 and B1000 two stroke engine
  • material: seal-paper
  • one piece will be needed
2,20 €*
Art.No. 3139

Seal for water pump, labyrinth

Some Wartburg and B1000 engines have an splitted pump case.
This Waterpump seal fit to the outer cap, the labyrinth housing.
For the total sealing you need additional still the normal water pump seal
  • material: seal-paper
  • one piece will be needed
2,50 €*
Art.No. 7253

switch for radiator fan

Thermoswitch for the electrical radiator fan of the Wartburg 353 from vintage: may 1985.
The switch is mounted upside the lower connector for the cooling water at the radiator.
  • delivery inclusive sealing ring
  • made in Germany
  • one piece will be needed
16,66 €*
Art.No. 7286

Radiator

radiator for Wartburg 353 from vintage: may 1985.
The cooler is placed in front of the engine.
  • radiator with aluminium-rib
  • made in EU
  • one piece will be needed
138,00 €*
Art.No. 6295
Cooling hoses Wartburg 353 with radiator in front of the engine

Radiator hose set(W353 from June 1985 onwards)

Complete set oft coolant hoses to for the Wartburg 353 with vintage from June 1985 onwards (radiator is placed in front of engine).
Fit to all types like Limousine, Tourist and Trans.
Scope of delivery:
  • 1x radiator hose: 29x390mm
  • 1x radiator hose: 24x410mm
  • 1x radiator hose: 24x420mm
  • 1x radiator hose: 15x560mm
  • 1x radiator hose: 11x760mm
  • 2x radiator hose: 15x700mm
55,92 €*
Art.No. 7488

Lower radiator hose (W353 from June 1985 onwards)

fitted coolant hose to connect the connection piece (connected with lower cooler connection) with water pump of Wartburg 353 with vintage from June 1985 onwards (radiator is placed in front of engine).
  • Length: ca. 41 cm
  • Inner diameter: 24 mm
  • Outer diameter: 34 mm
Part-No. 53 11105 501
14,49 €*
Art.No. 7025
Cooling hoses Wartburg 353 with radiator behind the engine

Lower radiator hose (W353 up to May 1985)

fitted coolant hose for lower cooler connection of Wartburg 353 with vintage up to May 1985 (radiator is placed behind the engine).
  • Inner diameter: 24 mm
  • Outer diameter: 34 mm
  • Length: 22cm
Part-No. 53 01100 611
8,55 €*
Art.No. 7024

Coolant hose W353 up to May 1985

Water hose for the Wartburg 353 with radiator behind the engine.
Fit to Wartburg 353 Limousine, Tourist and Trans up to vintage Mai 1985.
  • Coolant from thermostat casing of the cylinder head to the radiator upper connection
  • one piece will be needed
6,50 €*
Art.No. 7378

Coolant hose W353 up to May 1985 to heat exchanger

Water hose for the Wartburg 353 with radiator behind the engine.
Fit to Wartburg 353 Limousine, Tourist and Trans up to vintage Mai 1985.
  • Coolant from the water pump to the heat exchanger
  • one piece will be needed
15,50 €*
Art.No. 7380

Coolant hose W353 up to May 1985 from heat exchanger

Water hose for the Wartburg 353 with radiator behind the engine.
Fit to Wartburg 353 Limousine, Tourist and Trans up to vintage Mai 1985.
  • Coolant from the heat exchanger the thermostat casing on top of the cylinder head
  • one piece will be needed
15,50 €*
Art.No. 7381

Coolant hose W353 up to May 1985 Compensating tank

Water hose for the Wartburg 353 with radiator behind the engine.
Fit to Wartburg 353 Limousine, Tourist and Trans up to vintage Mai 1985.
  • Coolant from compensating reservoirto to the radiator connection
  • one piece will be needed
5,68 €*
Art.No. 7379

Valve for cooling water

Brass drain cock will be mounted direct on the motor block (exhaust side).
Fit to: Wartburg 311, 312,313, 353, Framo, Barkas B1000.
25,90 €*
Art.No. 6937

compensating reservoir (W353/B1000/M25)

Coolant compensating reservoir with one gland on bottom.

This coolant reservoir is suitable for follow car types:
  • Wartburg 353
  • B1000 (only 2-stroke)
  • Multicar M25

Suitable accessory:
39,21 €*
Art.No. 6728

blow off valve for compensating reservoir, 50kPa (W353/B1000)

Blow off valve for coolant compensating reservoir of Wartburg 353 and 2-stroke version of Barkas B1000.
It will be mounted inside reservoir cap.
  • pressure: 50kPa
  • one piece will be needed
  • made in EU
12,49 €*
Art.No. 6553

closure for compensating tank (T1.1/W1.3/B1000-1)

Cap with core thread for water bottle of Trabant 1.1.
  • scope of delivery without pressure valve
  • material: plastic
  • original spare part
  • one piece will be needed
5,38 €*
Art.No. 6645

Coolant hose, 15 x 3,5mm (yard goods)

rubber coolant hose with textile inset (DIN 73411 7/79)
  • up to 6 bar
  • Inner diameter: 15 mm (0,59 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.
Made in Germany
17,92 €*
Art.No. 6936

Coolant hose, 25 x 4,5mm (1 Meter)

Rubber coolant hose with textile inset (DIN 73411 7/79)
  • bup to 6 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.
Made in Germany
29,86 €*
Art.No. 6917

Coolant hose, 25 x 3,5mm (1 Meter)

rubber coolant hose with textile inset (DIN 73411 issue 1955)
  • working pressure: 3 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • Outer and inner layer made of black SBR-rubber quality
  • resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.
Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperature Fit to many veteran cars, for instance Wartburg 311
14,77 €*
Art.No. 6948

Hose connector 19mm, universal

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:
  • diameter: 19mm
  • lenght of the connection side: 32mm
  • legth total: 75mm
  • material: plastic, temperatur and oel restistant, whithe
2,50 €*
Art.No. 7432

compensating tank complete, universal

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines
41,98 €*
Art.No. 7430
The complete offer in cooling system
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas