This site in german: Trabant 601 > Tuningteile > Spurverbreiterung Trabant 601 > Tuningteile > Spurverbreiterung

> Trabant 601> Tuning parts> wheel spacer

* All prices inclusive VAT and plus shipping costs.

wheel spacer







The complete offer in wheel spacer

Steering angle limiter

One paar of rings to limit the Steering angle. Infinitely variable, mounting dirctly at the steering rack.
  • material: steel
  • delivery inclusive mounting bolts
  • fit to Trabant 601 and Trabant 1,1
content: 1 pair (2 pieces) 35,00 €*
Art.No. 6718
Camber variation front axle Trabant 

Outer wishbone - set with camber variation 12,5 mm

Trabant 601 bottom wishbone for camber variation at the front axle.
The track of the car will be 12,5 mm more wide at each wheel side as the original one. The modification angle is 2,75 degrees.
  • material: steel, milled
  • surface: galvaniced
  • delivery inclusive nipple head
  • made in Germany
  • one set consist of two pieces
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. 89,95 €*
Art.No. 6675

Modification rear axle camber 3,8 degree

Trabant 601 rear wheel camber variation.
The modification angle is 3,8 degrees wheelside .
  • only use for leaf spring
  • material: steel, milled
  • surface: galvaniced
  • delivery inclusive mounting bolts
  • made in Germany
  • one set consist of two pieces
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. 49,99 €*
Art.No. 7207

Outer wishbone - set with camber variation 25,00 mm

Trabant 601 bottom wishbone for camber variation at the front axle.
The track of the car will be 25,00 mm more wide at each wheel side as the original one. The modification angle is 5,50 degrees.
  • material: steel, milled
  • surface: galvaniced
  • delivery inclusive nipple head
  • made in Germany
  • one set consist of two pieces
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. 89,95 €*
Art.No. 6677

Modification rear axle camber 1,9 degree

Trabant 601 rear wheel camber variation.
The modification angle is 1,9 degrees wheelside .
  • only use for leaf spring
  • material: steel, milled
  • surface: galvaniced
  • delivery inclusive mounting bolts
  • made in Germany
  • one set consist of two pieces
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. 49,99 €*
Art.No. 7208

Adaption wheel spacers

Adaption wheel spacer (bolt circle changer)

hole circle adapter 20 mm 4 x 160 mm to 4 x 98 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 98 mm, a centring hole diameter of 58 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
198,00 €*
Art.No. 6231

hole circle adapter 30 mm 4 x 160 mm to 4 x 98 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 98 mm, a centring hole diameter of 58,0 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
234,00 €*
Art.No. 6234

hole circle adapter 20 mm 4 x 160 mm to 4 x 100 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 100 mm, a centring hole diameter of 57,0 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
198,00 €*
Art.No. 6232

hole circle adapter 30 mm 4 x 160 mm to 4 x 100 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 100 mm, a centring hole diameter of 57,0 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
234,00 €*
Art.No. 6235

hole circle adapter 20 mm 4 x 160 mm to 4 x 108 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 108 mm, a centring hole diameter of 63,3 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
198,00 €*
Art.No. 6233

hole circle adapter 30 mm 4 x 160 mm to 4 x 108 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 108 mm, a centring hole diameter of 63,3 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
234,00 €*
Art.No. 6236

hole circle adapter 30 mm 4 x 160 mm to 4 x 114,3 mm

made from aluminium-magnesium-alloy
for one axle

for mounting rims with a hole circle diameter of 114,3 mm, a centring hole diameter of 66,5 mm and 4 mounting holes for the wheel bolts

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 234,00 €*
Art.No. 6237
Wheel bolts with different sizes

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 3,30 €*
Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 3,30 €*
Art.No. 6450

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
3,10 €*
Art.No. 7201

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 3,90 €*
Art.No. 7203
Wheel spacer for bolt circle 4x160mm

wheel spacer 5mm 4x160

made from aluminium-magnesium-alloy
for one axle
thickness: 5mm for each disc (10mm for axle)

without centring collar and mountig material
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
46,90 €*
Art.No. 6221

wheel spacer 10mm 4x160

made from aluminium-magnesium-alloy
for one axle
thickness: 10 mm for each disc (20 mm for axle)

without centring collar and mountig material
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
56,87 €*
Art.No. 6222

wheel spacer 15mm 4x160

made from aluminium-magnesium-alloy
for one axle
thickness: 15 mm for each disc (30 mm for axle)

without centring collar and mountig material
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
Special offer normaly 68.63€ now 49,99 €*
Art.No. 6223

wheel spacer 20mm 4x160

made from aluminium-magnesium-alloy
for one axle
thickness: 20 mm for each disc (40 mm for axle)

without centring collar and mountig material
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
79,42 €*
Art.No. 6224

wheel spacer 20mm 4x160 (with wheel bolts)

made from aluminium-magnesium-alloy
for one axle
thickness: 20 mm for each disc (40 mm for axle)

mountig material included

Attention!

recesses (bag drillings) at the hub mating surface of the rims necessary or when assembling of the shims original wheel lug must be shortened
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 172,55 €*
Art.No. 6227

wheel spacer 25 mm 4x160 (with wheel bolts)

made from aluminium-magnesium-alloy
for one axle
thickness: 25 mm for each disc (50 mm for axle)

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 184,32 €*
Art.No. 6228

wheel spacer 30 mm 4x160 (with wheel bolts)

made from aluminium-magnesium-alloy
for one axle
thickness: 30 mm for each disc (60 mm for axle)

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 196,00 €*
Art.No. 6229

wheel spacer 35 mm 4 x 160 mm (with wheel bolts)

made from aluminium-magnesium-alloy
for one axle
thickness: 35 mm for each disc (70 mm for axle)

mountig material included
content: 1 pair (2 pieces) Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges. 207,85 €*
Art.No. 6230
The complete offer in wheel spacer
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas