This site in german: IFA-Fahrzeuge > Multicar M24 > Bremsanlage IFA-Fahrzeuge > Multicar M24 > Bremsanlage

> IFA-vehicles> Multicar M24> Brake system

* All prices inclusive VAT and plus shipping costs.

Brake system







The complete offer in Brake system

Wheel brake cylinder, front right hand, original

Complete in Germany overhauled front wheel brake cylinder with ring sleeves and brak-piston.
Mark: RENAK LZ 5
  • for each wheel side two pieces will be needed
  • scope of delivery inclusive sleeves
  • without bleeder screw
  • without adjuster
  • piston diameter: 31,8 mm
  • fit for Barkas B1000, B1000-1 and Multicar M24

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak RENAK LZ 5 to our company in advance!
28,50 €*
Art.No. 7173

Wheel brake cylinder, front right hand

Brake cylinder for the front axle oft the Barkas B1000, B1000-1 and Multicar M24.
mounting place: front right hand
For each car two pieces will be needed
Made in EU.
29,50 €*
Art.No. 4206

Wheel brake cylinder, front left hand, original

Complete in Germany overhauled front wheel brake cylinder with ring sleeves and brak-piston.
Mark: RENAK LZ 5
  • for each wheel side two pieces will be needed
  • scope of delivery inclusive sleeves
  • without bleeder screw
  • without adjuster
  • piston diameter: 31,8 mm
  • fit toBarkas B1000, B1000-1 and Multicar M24

Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak RENAK LZ 5 to our company in advance!
28,50 €*
Art.No. 7172

Wheel brake cylinder, front left hand

Brake cylinder for the front axle oft the Barkas B1000, B1000-1 and Multicar M24.
mounting place: front left hand
For each car two pieces will be needed
Made in EU.
29,50 €*
Art.No. 4205

Ring sleeve, for wheel brake cylinder, front, original

Sleeve for front wheel brake cylinder of the Barkas B1000 and B1000-1 and Multicar M24.
Best quality made in Germany.
The set included 2 pieces.
The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
9,50 €*
Art.No. 7325

Bleeder screw, M12x1

Bleeder screw for many IFA vehicles. Tap M12 x 1 with selaing cone 90 degrees.
Fit to:
  • Barkas B1000
  • Barkas B1000-1
  • Multicar M22
  • Multicar M24
  • Multicar M25
  • Wartburg 311 and 313
3,74 €*
Art.No. 6121

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,35 €*
Art.No. 215

Brake master cylinder, 1 circle (+80€ pledge)

Complete in Germany overhauled brake master cylinder.
Type: Renak CH
Shipping only after your old brake cylinder with the mark IFA BH1 was send to our company.
Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo.
  • piston diameter: 25,4mm
+80,00 € pledge for old brake master cylinder 128,17 €*
Art.No. 7221

Sleeve set for brake master cylinder (1-circuit) Ø 25,4mm = 1

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311.
  • for diameter of piston: 25,4 mm
  • scope of delivery: two piece of ring sleeve
  • one piece is needed for each wheel brake cylinder
  • first-class quality made in Germany
19,50 €*
Art.No. 7176

Distributor for brake lines M24, M25

Terminal block for the brake fluid with three ports to connect the brake tubes or brake pipes. Fit to the cars Mulicar M24 and M25.
  • material: brass
  • thread : M12 X 1
  • mounting-diameter: 8,4 mm
7,73 €*
Art.No. 7274

pipe-connector

Brake tube merger for the connection of two brake tubes with flange type E and thread M12x1mm
  • material: steel, galvanized
  • thread: M12 X 1
  • lenght: 29mm
  • made in Germany
3,61 €*
Art.No. 7275

Universal brake line, PVC-coated per 1 m , 6 x 0,7 mm

Brakepipeline 6mm x 0,7mm for Barkas B1000
price per meter.
max. lenght per piece: 5m
3,55 €*
Art.No. 6038

Universal brake line 6x0,7 *5m*

Zinced and PVC-plated steel brake line.
Scope of delivery 5 meters.
The pipe can be bent by hand with normal pressure. For the flange on the end of the tubes it will be necessary to use an professional tube border tool.
  • outside diameter: 6mm
  • thickness: 0,7mm
  • length: 5m
  • made in Germany
price per meter: 32,4 € 16,21 €*
Art.No. 6039

Holder for brake hose

Brake hose retainer for Multicar M22, M24, M25
  • to put into the circumferential slot of the brake hose fitting
  • slot wide: 14 mm
  • thickness: 1,75 mm
4,73 €*
Art.No. 6037

Screw-cap for brakeline 6 x 0,7

Screw-cap for brakeline 6mm x 0,7mm
Barkas B-1000

thread: M12x1
1,00 €*
Art.No. 7276

Protection bellows for pressure bar input brake master cylinder

Protection bellows for the single and tandem brake master cylinders.
fit ot vehicles: Framo, B1000, B1000-1, Wartburg 311, 312, 313, 353, Multicar M22, M24, M25.

inner diameter conical end: 15 mm
inner diameter cylindrical end: 37 mm
length: 35 mm - 58 mm
6,89 €*
Art.No. 4214

Universal brake line, CUNIFER 5m, 6mm

Brakepipeline 6 x 0,7 mm
made of NiCuFe
length: 5m
for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m 42,99 €*
Art.No. 7398

Brake hose rear, fit to Multicar

Wheel brake hose for the rear brake system of the Multicar type M22, M24, M25.
Connection hose between the brake pipe and the wheel brake cylinder rear axle.
  • total lenght: 51cm
  • thread: M12x1, both ends as male type
  • delivery as an single part
  • made in EU
  • for one vehicle two pieces will be needed
8,50 €*
Art.No. 7641
The complete offer in Brake system
* All prices inclusive VAT and plus shipping costs.

 
© 2003 - 2009 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas