IFA-vehicles

	IFA-Fahrzeuge
> IFA-vehicles		Home \| Impressum \| Terms of business \| Forums \| Basket
	* All prices inclusive VAT and plus shipping costs. IFA-vehicles

Die Warengruppe IFA-vehicles has the following subcategorys:

Framo - P70 / F8 / F9 - Trabant 500/600 - Wartburg 311 / 312 / 313 - Multicar M22 - Multicar M24 - Multicar M25

The complete offer in IFA-vehicles

IFA vehicles

Indicator lamp complete Robur, Framo

Detail

Direction indicator as an complete spare part
Angular flasher lamp of the LKW Robur LO and LD as Frami as well.
Can be used for 6V,12V und 24V bulbs 21W
Colour: orange / yellow
Delivery inclusive chrome frame, lense and sealing, base plate with bulb holder, mounting plate, rubber wire sealing and rubber sealing to the car body.
new original spare part
original no: 8580.9/1

ZAK-NR.1366554103930018

15,20 €*
Art.No. 7620

Indicator lense Robur, Framo Detail Lense for the angular flasher lamp of the LKW Robur LO and LD as Frami as well. colour: orange / yellow new original spare part original no: 104-62 ORANGE
4,25 €* Art.No. 7569

Rear wheel brake cylinder S4000 and W50

Detail

Wheel brake cylinder overhauled for the rear axle of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.

cylinder bore: 38 mm
delivery complete with cap sleeves and dust sealings
case mark: FZ 25R
overhauled in Germany

49,95 €*
Art.No. 7637

Dust sealing for fornt wheel brake cylinder S4000 and W50

Detail

Dust sleeve for the front wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.

clinder diameter: 31,8 mm (1" 1/4)
material: rubber, black
two pieces will be needed for each wheel brake cylinder
made in Germany

8,50 €*
Art.No. 7639

Cap sleeve for fornt wheel brake cylinder S4000 and W50

Detail

Cap sealing for the front wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.

clinder diameter: 31,8 mm (1" 1/4)
thickness: 8mm
two pieces will be needed for each wheel brake cylinder
made in Germany

6,90 €*
Art.No. 7177

Bleeder screw for frontwheel brake cylinder S4000 and W50

Detail

Bleeder screw for the front brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.

thread: M8x1,25
spanner gap: SW9
total length: 32,5 mm
thread length: 12 mm
length of the spanner gap: 4,6 mm
one piece will be needed for each wheel brake cylinder

0,96 €*
Art.No. 7635

Fornt wheel brake cylinder S4000 and W50

Detail

Wheel brake cylinder overhauled for the front axle of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.

cylinder bore: 31,8 mm
delivery complete with cap sleeves and dust sealings
case mark: FZ 5R
overhauled in Germany

49,95 €*
Art.No. 7638

Sleeve for rear wheel brake cylinder S4000 and W50

Detail

Cap sealing for the rear axle wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.

clinder diameter: 38 mm (1" 1/4)
thickness: 8mm
two pieces will be needed for each wheel brake cylinder
made in Germany

6,90 €*
Art.No. 7636

Bleeder screw for rear wheel brake cylinder S4000 and W50

Detail

Bleeder screw for the rear brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.

thread: M8x1,25
spanner gap: SW9
total length: 49 mm
thread length: 15 mm
length of the spanner gap: 7,6 mm
one piece will be needed for each wheel brake cylinder

3,52 €*
Art.No. 7634

Ring sleeve wheel brake cylinder

Detail

Ring sleeve for the wheel brake cylinder of the lorry Robur LO oder LD.

scope of delivery: 1 piece
piston diameter: 38 mm
made in Germany

6,90 €*
Art.No. 7234

Sealing ring set for brake master cylinder EH 107

Detail

Rubber sealing set consist of one outer lip ring and one cap sleeve for the single-circuit brake master cylinder type EH 107 with hole diameter 32mm.

one kit will be needed for the brake master cylinder
made in Germany

17,23 €*
Art.No. 7615

Sealing ring fit to brake master cylinder of ROBUR truck

Detail

Sealing ring with outer lip for 2-circuit brake master cylinder of ROBUR truck LO or LD (made in GDR)

Outer diameter: 32 mm (1" 1/4)
Inner diameter: 22 mm (0,866")
thickness: 5 mm (0,197")
four pieces will be needed for one brake master cylinder
made in Germany

6,90 €*
Art.No. 7175

Brake master cylinder, 1 circle

Detail

Complete in Germany overhauled brake master cylinder.
Type: Renak EH 106
Shipping only after your old brake cylinder with the mark IFA EH 106 was send to our company.
Brake master cylinder for single brake circle fit to the vehicles: Robur, Dumper, Garant K30, Picco, Framo, Sachsenring.

piston diameter: 25,4mm

128,17 €*
Art.No. 7391

Ring sleeve master brake cylinder, W50

Detail

Ring sleeve for the master brake cylinder of the lorry IFA W50.

scope of delivery: 1 piece
piston diameter: 38 mm
made in Germany

6,90 €*
Art.No. 7230

Master brake cylinder W50, old version

Detail

Complete overhauled two circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry IFA W50.
Type: old version (complete bore diameter: 38mm)
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.

piston diameter: 38 mm
case type: WJ 15a or WJ 85
overhauled in Germany

129,30 €*
Art.No. 7640

Master brake cylinder W50, late version

Detail

Complete overhauled two circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry IFA W50.
Type: new version (complete bore diameter: 38mm)
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.

piston diameter: 38 mm
case type: ZM 31R
overhauled in Germany

129,30 €*
Art.No. 7656

Master brake cylinder S4000

Detail

Complete overhauled one circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry S4000 and S4000-1.
Type: Single brake system.
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.

delivery inclusive dust cap for pushing pin
piston diameter: 38 mm
case type: FH 107
overhauled in Germany

202,94 €*
Art.No. 7657

Ring sleeve master brake cylinder, L60

Detail

Ring sleeve for the master brake cylinder of the lorry IFA L60.

scope of delivery: 1 piece
piston diameter: 45 mm
made in Germany

6,90 €*
Art.No. 7235

Retro back up lamp for rear bumper

Detail

Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, clear glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany

77,71 €*
Art.No. 6876

Retro rear fog lamp for rear bumper

Detail

Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, red glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany

77,71 €*
Art.No. 6877

Replacement glass for RETRO reverse lamp

Detail

Red glass as spare part for our RETRO reverse indication lamp

material: clear (white) glass
made in Germany

8,93 €*

Art.No. 7137

Replacement glass for RETRO rear fog lamp

Detail

Red glass as spare part for our RETRO fog light

material: red glass
made in Germany

19,99 €*

Art.No. 7136

LDM-Design outer rear view mirror, right Detail chromed Design rear view mirrors for co-drivers side (right door) arm is made of zinc die casting (chromed) mounting in the same way like original rear view mirrors These outer rear view mirrors was elaborate handmade by LDM-tuning no series producktion!
59,50 €* Art.No. 7063

LDM-Design outer rear view mirror, left Detail chromed Design rear view mirrors for drivers side (left door) arm is made of zinc die casting (chromed) mounting in the same way like original rear view mirrors These outer rear view mirrors was elaborate handmade by LDM-tuning no series producktion!
59,50 €* Art.No. 6337

Universal boot kit

Detail

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:

length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm

normaly 14.99€ now 9,49 €*
Art.No. 7010

Regulator and cutout relay for AC 12V Dynamo

Detail

The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:

one piece will be needed

DLR TGL33604

36,32 €*
Art.No. 775

Cleaning and maintenance agent for electrical connectors and components, 200ml

Detail

quick-cleaner for brake and clutch parts

content: 200 ml
excellent solvency for mixture of grease, oil and dirt
protection against creeping current

2,65 €*
Art.No. 7094

Reflector round, red (catseye) for rear bumper, metal ring

Detail

Round reflector for rear bumper corner of Trabant 500 and 600 (P50/60) or some other oldtimers, with additional aluminium frame around it.
Only partially fit to back light of Trabant 601 (mounting bolt could be to short).

Outer diameter: 63,5 mm (2,5")
Colour: red
refelector area: 20 cm²
aluminium ring frame
with base plate made of sheet metal
centric mounting bolt M5 x 15 mm

4,98 €*
Art.No. 6919

Reflector round, red (catseye) for rear bumper

Detail

Standard type of round reflector for rear bumper corner of Trabant 500 and 600 (P50/60)or some other oldtimers.
Only partially fit to back light of Trabant 601 (mounting bolt could be to short).

Outer diameter: 62,5 mm (2,46")
Colour: red
refelector area: 20 cm²
with base plate made of sheet metal
centric mounting bolt M5 x 15 mm

3,11 €*
Art.No. 6918

W50 hook for elastic band

Detail

special hook to use together with elastic string

fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
made of galvanised sheet metal
with two mounting holes (diameter: 5mm / well spacing: 34mm

1,83 €*
Art.No. 7317

large hook for elastic band

Detail

large hook to use together with elastic string

fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
made of galvanised sheet metal (thickness = 3mm)
with two mounting holes (diameter = 6,4 mm / well spacing = 45 mm)
wide total: 65 mm
hook wide: 16 mm

1,67 €*
Art.No. 7318

slim hook for elastic band

Detail

small hook to use together with elastic string

fit to many trucks and trailers/camper
made of galvanised sheet metal (thickness = 2,5 mm)
with two mounting holes (diameter = 5,2 mm / well spacing = 20 mm)
wide total = hook wide: 13 mm
high total: 53 mm

1,00 €*
Art.No. 7319

Cap for water vessel for windscreen washer system Detail Plastic cap with mounting sprap for the water bottle of the windscreen washer system. The plug close up the refilling hole. To use at many reservoir bottles with electrical or mechanical pump. fit to follow washer systems: Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €* Art.No. 7357

Fuse 8A Detail white fuse for current up to 8A fit to all vehicles with this type of fuse
0,18 €* Art.No. 1220

Fuse 16A Detail red fuse for current up to 16A fit to all vehicles with this type of fuse
0,18 €* Art.No. 1221

Key switch Detail One grade switch made of Duro-plastic Can be used for 6,12 (120W) and 24V (150W) electrical systems. Best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.21/1	1,95 €* Art.No. 7590

Fuse set

Detail

Torpedo-fuse kit ideal for traveles or for the daily use.
Delivery with resealable blister box.
Scope of delivery:

4x 8A (withe)
4x 16A (red)
2x 25A (blue)

0,99 €*
Art.No. 6437

Rocker switch rear window defroster

Detail

Angular single step switch with function light for mounting for example at the dashboards.
Colour of the switch: yellow
symbol: window defroster
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
Delivery without bulbs, it will be for example glas base bulb 12V 1,2W one needed.

original spare part number: 8620.19/112

9,88 €*
Art.No. 7627

Single grade pull switch Detail Small pull switch for mounting for example at the dashboards. Can be used for 6,12 and 24V electrical systems. Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.23	3,28 €* Art.No. 7589

Windscreen washer kit 6V

Detail

Set for windscreen washer system with electrical pump and water bottle
voltage: 6V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 12V

Ideal for upgrate the mechanical hand pump into an electrical system.

25,90 €*
Art.No. 7597

Copper pipe 5x1

Detail

Pipes made of copper as an 5m collar.
The copper tube is an ductile, seamless streched and easy by hand bendabel.
Ideal and easy to apply for Old- and Youngtimes and lorrys as well.
Can be used for repair or complete production from scratch for fuel pipes, oel pipes or diesel pipes.
The copper material can by finished with an chrome plate after your work is done.

Material: copper
outside diamter: 5mm
inside diamter: 3mm
thickness: 1mm
length: 5m Bund

price per meter: 5,16 Euro

25,79 €*
Art.No. 7570